Schlöder

For verification of ESD generators in accordance with IEC 61000-4-2 with 2 Ω ESD target, 20 dB attenuator and bandwidth up to 4 GHz for future standard requirements.

Burst generator for IEC 61000-4-4 EMC testing with pulse frequency up to 125 kHz, adjustable test parameters and functions for simulation of transient disturbances.

Surge/hybrid generator for IEC 61000-4-5 EMC testing with 1.2/50 µs voltage pulse and 8/20 µs current pulse, adjustable up to 4.4 kV and 2.2 kA with interface control.

Burst generator for IEC 61000-4-4 EMC testing with pulse frequency up to 2 MHz, up to 2000 pulses per burst and integrated 1-phase coupling network 16 A.

Magnetic field generator and analyser for EMC testing according to EN 61000-4-8 with DC–250 kHz range, field strengths up to 1000 A/m and integrated generator, amplifier and analysis.

Voltage interruption and dip simulator for EMC testing of AC and DC supply with adjustable interruptions, dips and fluctuations, and inrush current measurement up to 16 A.

3-phase coupling/decoupling network for burst and surge testing according to IEC 61000-4-4/-4-5, up to 16 A, with switchable coupling paths and RS232 interface for remote control.

ESD simulator with air and contact discharge up to 30 kV, predefined test levels, discharge voltage indication, and programmable test sequences.

ESD simulator with air/contact discharge per IEC/EN 61000-4-2, programmable tests, discharge voltage display and battery or mains operation.

Switching/disconnection network for immunity testing of conducted RF disturbances per IEC/EN 61000-4-6, with models for unshielded and shielded power and data lines.

EM coupling clamp for immunity testing in accordance with IEC/EN 61000-4-6, frequency range 10 kHz–1 GHz, designed for unshielded cables up to 20 mm in diameter.

Capacitance coupling clamp for burst testing of data and I/O lines in accordance with IEC/EN 61000-4-4, designed for capacitive coupling during immunity testing.

Test and pulse generator for insulation and impulse withstand testing of electricity meters, generating a standardised 0.1/2000 µs waveform in accordance with FNN guidelines.

Windows-based control software for SESD 30000/230/216 ESD generators with optical interface (10 m fibre), ramp functions and sequence editing for automatic tests.

Immunity test generator for IEC 61000-4-16 EMC testing with DC–300 kHz range, up to 250 W output power and 5 A current, with integrated function generator and USB control.

EFT/burst generator for IEC 61000-4-4 EMC testing with pulse frequency up to 125 kHz, pulse amplitude up to 5 kV and integrated coupling network with touchscreen.

Surge/combined wave generator for IEC 61000-4-5 EMC testing with 1.2/50 µs voltage pulse and 8/20 µs current pulse, up to 4.4 kV and 2.2 kA with touchscreen and USB.

Conducted immunity test generator for IEC 61000-4-6 with integrated RF signal generator, amplifier, 3-channel RF voltmeter and directional coupler.

ESD simulator up to 30 kV air and contact discharge per IEC/EN 61000-4-2 and ISO 10605, with interchangeable RC modules, touchscreen and battery or mains operation.

Immunity test system for EFT/burst 5 kV, surge 5 kV 1.2/50 µs–8/20 µs, voltage dips/interruptions and magnetic fields per IEC/EN 61000-4 series, with integrated 16 A single-phase CDN.

Compact EMC test system for EFT/Burst, Surge, ring wave, dips/interrupts, telecom wave and magnetic field with integrated 16 A CDN and touchscreen control.

Magnetic field test system for power-frequency magnetic fields in accordance with IEC 61000-4-8, with power supply and test coil for vertical and horizontal exposure.

Modular surge test system per IEC/EN 61000-4-5 up to 30 kV and 30 kA, with support for multiple waveforms, automatic polarity switching and integrated test cabinet.

2-line coupling/decoupling network for surge testing according to IEC 61000-4-5, up to 4400 V pulse voltage, with gas discharge coupling and switching of disturbance paths.

Coupling/decoupling network for surge testing according to IEC 61000-4-5, up to 4400 V pulse voltage, with selectable coupling paths and versions for 4 A or 10 A.

4-line coupling/decoupling network for surge testing according to IEC 61000-4-5, up to 4400 V pulse voltage, 6 A/250 VAC, with RS232 interface for remote control.

3-phase CDN for AXOS 5/8 per IEC/EN 61000-4-4/-4-5/-4-12 and ANSI C62.41, 480 V AC/DC, 32 A per phase, for surges 1.2/50 µs–8/20 µs, ring wave and EFT/burst.

3-phase CDN for AXOS 5/8 per IEC/EN 61000-4-4/-4-5/-4-12 and ANSI C62.41, 690 V AC/DC, 63 A per phase, for surges 1.2/50 µs–8/20 µs, ring wave and EFT/burst.

3-phase CDN in accordance with IEC/EN 61000-4-5/-4-12 and ANSI C62.41/62.45, 690 V AC and 100 A per phase, for surges 1.2/50 µs–8/20 µs and ring waves up to 8 kV.

3-phase CDN in accordance with IEC/EN 61000-4-4 and ANSI C62.41/C37.90.1, 690 V AC and 100 A per phase, for EFT/burst 5/50 ns up to 8 kV.

Verification adapter to check FP-EFT 100M2

Decoupling network for unshielded symmetrical (DEC 5/6) or asymmetrical (DEC 7) signal lines per IEC/EN 61000-4-5/-4-12 and ITU K.44, testing up to 4 lines.

Coupling network for unshielded symmetrical (121/122) or asymmetrical signal lines in accordance with IEC/EN 61000-4-5/-4-12 and ITU K.44, testing of up to 4 lines.

Single-phase transformer for simulating voltage dips and short interruptions per IEC/EN 61000-4-11/-4-29, 264 V AC, 16 A continuous, controlled via AXOS 5/8.

Capacitive coupling clamp for burst testing according to IEC 61000-4-4, with coupling capacitance of 100 pF–1000 pF for injection of transient disturbances into signal lines and cable shields.

ESD simulator up to 16 kV air and contact discharge in accordance with IEC/EN 61000-4-2, with interchangeable RC modules, touchscreen and battery or mains operation.

EM coupling clamp for immunity testing in accordance with IEC/EN 61000-4-6, 10 kHz–1 GHz, for unshielded cables up to 35 mm where a CDN is not suitable.

Current monitoring probe for EMC testing according to IEC 61000-4-6 and ISO 11452-4 with 10 kHz–400 MHz range for measurement of RF currents in conductors and cable bundles.

Current monitoring probe for EMC testing according to IEC 61000-4-6 and ISO 11452-4 with 10 kHz–400 MHz range, closed design and measurement of RF currents in conductors.

Current injection probe for EMC testing according to IEC 61000-4-6 and ISO 11452-4 with 4 kHz–400 MHz range when used with MT-1, for BCI testing of cabling.