Pico

4-channel PC oscilloscope with 30 GHz bandwidth, 16-bit resolution and 15 TS/s sequential sampling rate for multi-channel high-speed signal analysis.

2-channel PC oscilloscope with 20 GHz bandwidth, 16-bit resolution, 15 TS/s sequential sampling rate and integrated TDR/TDT functionality.

4-channel PC oscilloscope with FlexRes 8/16-bit resolution, 500 MHz bandwidth, 5 GS/s, 16 digital channels and 2 GS memory.

4-channel PC oscilloscope with 200 MHz bandwidth, 16-bit resolution, 2.5 GS/s, 16 digital channels, 1 GS memory and integrated AWG/function generator.

4-channel mixed-signal PC oscilloscope with 500 MHz bandwidth, 5 GS/s, 2 GS memory, 16 digital channels and built-in function generator.

2-port S-parameter analysis 300 kHz–6 GHz with Quad RX architecture, up to 124 dB dynamic range, high measurement speed and USB control via PC.

4-channel, 33 GHz bandwidth, 5 TS/s random equivalent time sampling (0.2 ps), 12-bit 500 MS/s ADC and up to 250 kS memory, CDR up to 11.3 Gb/s.

4 x P2036 300 MHz probes with magnetic PCB holders, 2.5 mm probe holders and A4 base plate for hands-free measurements up to 300 MHz.

4 x P2056 500 MHz probes, magnetic PCB holders, 2.5 mm probe holders and A4 base plate for hands-free measurements up to 500 MHz.

4-channel PC oscilloscope with 1 GHz bandwidth, FlexRes up to 12 bits, 5 GS/s and 4 GS memory for maximum measurement accuracy.

Active high-impedance probe, 750 MHz bandwidth, 1 MΩ input impedance, 0.9 pF input capacitance and automatic probe detection with 50 Ω switching.

Active high-impedance probe, 1.3 GHz bandwidth, 1 MΩ input impedance, 0.9 pF input capacitance and automatic probe detection with 50 Ω switching.

8-channel PC oscilloscope with 20 MHz bandwidth, 12-bit resolution, 256 MS memory, 80 MS/s sampling rate and built-in function/AWG generator.

Measuring range 200/2000 A AC/DC with BNC output, output sensitivity 10/1 mV/A, overload capacity 2200 A and accurate current measurement up to 2 kA.

MSO pod with 8 digital channels, 500 MHz bandwidth, up to 5 GS/s sampling (16 channels), 1 ns minimum pulse width and connection via digital interface port.

8-channel PC oscilloscope with 500 MHz bandwidth, FlexRes resolution up to 12 bits, 5 GS/s and 4 GS memory for high-resolution measurements.

1-channel terminal board for USB TC-08, screw terminals without soldering, supports ±5 V, ±500 mV, ±50 mV and 4–20 mA measurement.

3 GHz RF adapter, SMA female to BNC male, 50 Ω impedance for connection between RF and oscilloscope accessories.

18 GHz RF adapter, SMA female to N male, 50 Ω impedance for high-frequency connections.

18 GHz 50 Ω SMA male-to-female adapter, contact saver for frequent connection cycles and protection of sensitive RF inputs.

2-channel MSO oscilloscope with 200 MHz bandwidth, 1 GS/s, up to 16-bit FlexRes resolution, 256 MS memory and built-in function generator.

5-pack of fixed replacement tips for TA375 and TA386, screw-mounted replacement tips for oscilloscope probes.

Spring-loaded replacement tips for TA375 and TA386 oscilloscope probes, 5-pack of interchangeable tips for accurate measurement and extended probe life.

Passive 1:1/10:1 oscilloscope probe with 200 MHz bandwidth, BNC connector, redesigned probe tip for interchangeable tips and improved durability.

Passive 1:1/10:1 oscilloscope probe with 100 MHz bandwidth, BNC connector, redesigned probe tip for interchangeable tips and improved durability.

4-channel MSO oscilloscope with 200 MHz bandwidth, 1 GS/s, up to 16-bit FlexRes resolution, 512 MS memory and built-in function generator.

D9 to dual BNC adapter for differential measurements with two single-ended probes or two BNC cables, compatible with PicoScope 4444.

D9 to single BNC adapter for differential and current probes, enables single-ended measurements with a ground-referenced probe.

Single-phase AC current probe with Rogowski coil technology, measurement ranges 30/300/3000 A, 10 Hz–20 kHz bandwidth and 3 V AC output via BNC.

3-phase AC current probe with Rogowski coil technology, measurement ranges 30/300/3000 A, 10 Hz–20 kHz bandwidth and BNC output for oscilloscopes and data loggers.

AC/DC current probe with D9 connector for PicoScope 4444, 200 A/2000 A ranges, DC–20 kHz bandwidth and automatic probe identification.

40 A AC/DC current probe with D9 connector for the PicoScope 4444, DC–100 kHz bandwidth, 100 mV/A sensitivity and automatic identification via the scope’s connector.

Passive 25:1 differential probe for PicoScope 4444, 10 MHz bandwidth, up to ±1000 V measurement range, 1000 V CAT III and D9 connection.

Passive 1:1 differential probe for PicoScope 4444, 15 MHz bandwidth, ±50 V operating range, 4 mm banana plugs and D9 output.

4-channel differential PC oscilloscope with 20 MHz bandwidth, 12–14-bit resolution, 256 MS memory and included 1:1 probes for low-level measurements.

BNC to dual 4 mm banana plugs, 1.2 m cable for connection between BNC socket and measuring instrument.

Feed-through terminator, DC–1 GHz bandwidth, 50 Ω impedance, 1 W power and BNC male-to-female connection.

Attenuator set with 3, 6, 10 and 20 dB, DC–1 GHz bandwidth, 50 Ω impedance, 1 W power and BNC male-to-female connection.

Kit containing six gigabit probes (6–9 GHz) for 12–18 Gb/s signals, two low-loss cables and a complete set of accessories including probe tips.

Kit containing six RF and microwave probes (4–5 GHz) with selectable AC/DC heads, two low-loss cables and a complete set of accessories.

DC-coupled 5:1 probe with 9 GHz bandwidth,

AC-coupled 5:1 probe with 9 GHz bandwidth,

DC-coupled 10:1 probe with 7 GHz bandwidth,

AC-coupled 10:1 probe with 7 GHz bandwidth,

DC-coupled 20:1 probe with 6 GHz bandwidth for gigabit signals,

AC-coupled 20:1 probe with 6 GHz bandwidth for gigabit signals,

DC-coupled 5:1 probe with 5 GHz bandwidth,

AC-coupled 5:1 probe with 5 GHz bandwidth,

DC-coupled 10:1 probe with 4 GHz bandwidth for RF signals and pulses,

AC-coupled 10:1 probe with 4 GHz bandwidth for RF signals,

DC-coupled 20:1 probe with 4 GHz bandwidth for RF and microwave signals,

AC-coupled 20:1 probe with 4 GHz bandwidth for RF and microwave signals,

USB Type-C to USB Standard-A (female) adapter, 0.14 m, for connecting PicoScope and PicoLog to a computer with a Type-C port.

4.5 m USB 2.0 cable with 20 AWG conductors for a stable power supply and reduced voltage drop when used with PicoScope oscilloscopes.

1.2 m USB 2.0 cable with 20-AWG conductors for a stable power supply and reduced voltage drop when used with PicoScope oscilloscopes.

Hard carrying case with foam inserts for the PicoScope 3000D, 3400A/B, 4824 and 5000A/B series.

4-channel PC oscilloscope with 100 MHz bandwidth, 1 GSa/s, 128 MS memory and built-in function generator for high bandwidth and deep storage.

2-channel PC oscilloscope with 100 MHz bandwidth, 1 GSa/s, 128 MS memory and built-in function generator for high-resolution measurements.

2+16-channel MSO instrument with 100 MHz bandwidth, 1 GSa/s, 128 MS memory and built-in function generator for high-performance mixed-signal analysis.

Passive 10:1 low-impedance probe for 50 Ω input, 1.5 GHz bandwidth, 500 Ω input impedance, 2 pF capacitance and BNC connector.