Chroma

Integrated PD tester with AC Hi-Pot up to 10 kV, PD range 1–2000 pC and built-in HVCC function for insulation and semiconductor testing.

Modular PD tester with AC Hi-Pot up to 10 kV, PD measurement 1–6000 pC, USB storage and LAN/RS232 control for insulation testing.

Bidirectional DC power supply 2000 V/180 A/36 kW with regenerative load,

0–20 V, 2 kW, up to 1,000 A, low-voltage operation down to 0.25 V, CC/CR/CV/CP modes, programmable sequences and USB/GPIB/Ethernet/CAN.

Bidirectional DC power supply 100 V/180 A/6 kW with regenerative load,

Regenerative AC load 15 kVA with 89% efficiency, CC/CP/CR modes, phase shift simulation, 30–350 V, 30–100 Hz, USB/LAN interface and touchscreen control.

Regenerative DC load 1800 V/40 A/18 kW with 93% recovery efficiency, CC/CR/CV/CP modes, sequence programming, USB/LAN interfaces and master/slave function.

Regenerative 1- or 3-phase power grid simulator 0–350 V, 30–100 Hz, 9 kVA, with AC/DC mode, low distortion (< 0.5%), PLD test and RS232/USB/LAN interfaces.

Programmable 1- or 3-phase AC power supply 0–350 V, 15 Hz–2 kHz, 3 kVA, with low distortion, PLD simulation, harmonic analysis and RS232/USB/LAN interfaces.

Programmable AC power supply 0–300 V, 15–1000 Hz, 500 VA, single-phase, with low distortion and fast transient response for precision applications.

Programmable AC power supply 0–300 V, 15–1000 Hz, 500 VA, with AC+DC mode, harmonic simulation, PLD testing, IEC 61000 compliance and RS232/USB/LAN interfaces.

30 kVA output power, 0–300 V, 30–100 Hz, 1-phase/3-phase operation, low distortion and support for harmonic simulation and GPIB/LAN interfaces.

Programmable AC power supply 0–300 V, 15 Hz–1.5 kHz, 12 kVA, 1-/3-phase mode,

AC power supply with 3-phase output, 1500 VA, 0–300 V, 15–1200 Hz and 0.98, AC+DC mode and GPIB/RS-232 interfaces.

Modular programmable DC power supply 15 V/90 A/1350 W with N+1 redundancy, CAN bus control, remote sensing and hot-swap capability.

AC/DC load 1800 W / 18 A / 350 V with CC, CR, CV and CP modes, programmable power factor control range, low ripple, 45–440 Hz frequency range and RS232/GPIB interfaces.

Multifunctional analyzer with high-voltage testing up to 5 kV AC and 6 kV DC, IR and DCR measurement, impulse winding test and 40-channel scanning for wound components.

8-channel scanner with high-voltage testing up to 5 kV AC and 6 kV DC, IR and DCR measurement, OSC control and flashover detection for testing wound components.

0.3% accuracy, 1–650/800 V DC source, 0.001 µA–20 mA leakage current test, IR measurement, diode/Zener test, surge testing and RS-232 with optional GPIB.

1U design with single or three-channel output, up to 3×1.7 kW per channel, 230–1200 V, up to 22.5 A, CV/CC modes, fast transients

High-precision system with ±0.001% FS accuracy, 1 ms transient response, parallel connection up to 1200 A and regenerative AC/DC architecture for cell and LIC testing.

Regenerative test system 60–1000 V, up to 300 kW and 750 A, >90% efficiency, 2 ms current response and dynamic NEDC/FUDS/HPPC profile simulation.

Regenerative test system for battery modules with up to 60 kW per channel, parallel connection up to 2600 A, 85% energy recovery and CC/CV/CP modes.

High-precision system with 0.015% FS accuracy,

Up to 8 channels, 30–1200 W power, voltage ranges up to 500 V, CC/CR/CV/CP modes, dynamic load up to 20 kHz and USB/GPIB/RS-232.

Up to 6 kV pulse, 200 MHz sampling, eight test modes, support for BDV mode, as well as LAN/USB/RS232 and multi-channel testing for up to 25 cells.

Tests leakage current and insulation resistance up to 1 kV DC with PD detection, V/I waveform logging, automatic test sequence and USB/Ethernet interface.

3-/4-channel meter for R&D and testing. Measures AC/DC, harmonics and inrush currents. 600 Vrms/20 Arms. DSP technology. USB, LAN, GPIB.

500 VA HiPot analyzer with AC 5 kV, DC 6 kV, IR 5 kV, plus CSV, FSV and BDV analysis with corona discharge detection.

500 VA HiPot analyzer with AC 5 kV, DC 6 kV and IR up to 5 kV. HF control, flashover detection, DLA and RS-232 as standard.

with power levels from 2 kW to 24 kW, voltage options of 150 V, 600 V or 1200 V, up to 2000 A, CC/CR/CV/CP modes, CZ operation and USB/Ethernet/GPIB control.

Temperature and multifunction data logger with 1, 8 or 64 channels, support for thermocouple types B, E, J, K, N, R, S, T, and 1000 VDC channel-to-channel isolation.

Programmable DC load 150 V/40 A/250 W with CC/CR/CV/CP modes, 100 sequences, OCP/OLP test, short-circuit simulation and USB interface as standard.

Programmable DC load 150 V/60 A/350 W with CC/CR/CV/CP modes, 100 sequences, OCP/OLP testing, short-circuit simulation and USB interface as standard.

0.1% accuracy, test frequencies 60 Hz–30 MHz, 7 ms measurement, three output impedances, and support for sorting, zeroing and RS-232/USB interfaces.

7.5 kW, 0–30 V, up to 250 A, ultra-high current stability ±10 ppm, master/slave series/parallel, high-resolution current programming, and USB with optional Ethernet/LXI.

0–600 V or 0–1000 V, 15 kW in 3U, solar cell simulation with fast transients, I-V curves and MPPT tests, plus USB/RS-232/RS-485 with optional GPIB/Ethernet.

AC/DC/IR/GB/LC and dynamic function in a single instrument. Test current up to 20 A, RS232 and support for multi-scan in automated safety tests.

AC/DC/IR/GB/LC and dynamic functions in a single instrument. Test current up to 20 A, flashover detection, OSC and RS232 for automated safety tests.

Programmable 1- and 3-phase AC sources with output power up to 9 kVA, 0–500 V voltage, harmonic simulation and test functions in accordance with IEC 61000-4-11.

6½-digit TRMS multimeter with 0.0015% DC accuracy, 300 kHz AC bandwidth, 2000 readings/s, temperature measurement and 4-wire resistance measurement.

Power meter for standby and energy measurement. Complies with ENERGY STAR, EN 50564 and IEC 62301. Harmonic analysis and DSP technology. USB and GPIB.

Measures protective earth resistance 0.1–510 mΩ with up to 45 A test current. Compact, reliable and compatible with the 19070 series high-voltage testers.

2–15 kW power, 0–1000 V, up to 375 A, high power density 15 kW in 3U, master/slave up to 150 kW, and USB/RS-232/RS-485 with optional GPIB/Ethernet.

10-channel AC/DC/IR electrical safety tester with synchronised output, flashover detection, OSC and RS232/GPIB. Can be linked up to 100 channels.

AC/DC/IR tester with high-voltage testing up to 5 kV AC and 6 kV DC, insulation resistance testing up to 50 GΩ, as well as earth continuity and OSC function.

AC/DC/IR tester with 4-channel HV scanner. Provides 5 kV AC, 6 kV DC and insulation resistance testing. OSC function and RS232 for remote control.

AC/DC/IR tester with 8-channel HV scanner. AC 5 kV, DC 6 kV and insulation resistance up to 50 GΩ. RS232 interface for automation.

AC testing up to 5 kV and insulation resistance testing up to 1 kV. OSC and GFI protection. Optional RS485 interface.

Modular DC loads 30–1200 W, 0–500 V, up to 8 channels, CC/CR/CP/CV modes, dynamic load up to 20 kHz, parallel connection and GPIB/USB/RS-232.

Up to 10 channels, 600 V voltage range, CC/CR/CV/CP modes, CZ operation, waveform functions and Ethernet/USB/GPIB control.

Programmable DC power supply 600–5000 W with up to 600 V / 120 A, constant power mode, rapid programming, precision measurement, sequence control and GPIB/USB interfaces.

150, 600 or 1200 V voltage range, 3–24 kW per unit, high measurement accuracy, dynamic load modes and parallel connection up to 480 kW.

1-channel power supply 60 V/6 A, 150 W, low ripple < 3 mVp-p, fast transient response < 50 µs, auto-ranging, protection functions and GPIB/USB interface.

1-channel power supply 36 V/7 A, 108 W, low ripple < 3 mVp-p, fast transient response < 50 µs, auto-ranging, remote sensing and GPIB/USB interface.

0.001 mΩ–1.9999 MΩ range, DC/pulse/dry circuit test, 0.05% accuracy, temperature compensation, 4-channel R-scanning and RS232 interface.

AC testing up to 5 kV, DC 6 kV and insulation resistance testing up to 1 kV. Measures 1 MO to 50 GO. Optional RS485 remote control.