SRS

Bayard-Alpert vacuum gauge for high-vacuum measurement, available in multiple models for different pressure ranges per datasheet.

Binary gas analyzer for non-invasive measurement of gas ratios or gas purity with

Clock signal from 1 µHz to 2.05 GHz with

Quadrupole-based residual gas analyzer up to 100 amu with CIS ion source, direct sampling at mTorr pressure,

Quadrupole-based gas analyzer with closed ion source, 200 amu mass range, 1 ppm detection limit, direct sampling up to 10 mTorr, and RGA and CIS modes.

Quadrupole-based gas analyzer with closed ion source, 300 amu mass range, 1 ppm detection limit, direct sampling up to 10 mTorr, and RGA and CIS modes.

Current source/sink 100 fA–100 mA with ±50 V compliance voltage, gain 1 nA/V–50 mA/V, bandwidth up to 200 kHz, low thermal drift, RS-232 and optical fibre.

Cryogenic temperature controller with 4 sensor inputs, 2 power outputs up to 100 W, 4 analogue outputs and up to 6 PID loops, as well as USB/Ethernet/RS232.

Switchable analogue time delay 0–63.5 ns with 0.5 ns resolution, low-reflection, pass-through coaxial design, BNC connectors and 50 Ω impedance.

Output voltage up to ±100 V with 1 mV resolution, low noise, 16-bit resolution, isolated output, USB/RS-232 interface and optional battery operation.

4 independent delay channels or two pulse channels with 5 ps resolution,

4 pulse outputs or up to 8 delayed channels with

Digital melting point apparatus for teaching labs with electronic temperature control, selectable ramp rates and visual analysis of up to three samples.

Function generator for laboratory and ATE use with 1 µHz–3.1 MHz frequency range, DDS architecture, multiple waveforms, phase-continuous sweeps and FSK modulation.

1 µHz–15.1 MHz frequency range, sine/square/ramp/triangle/noise, 1 µHz resolution, DDS-based generation, arbitrary waveforms and FSK modulation.

1-channel generator with a frequency range of 1 µHz–30 MHz, 1 µHz resolution, 12-bit resolution and support for AM/FM/PM/FSK modulation.

10 mHz–200 kHz frequency range,

Research-grade potentiostat/galvanostat with ±30 V compliance, ±1 A maximum current, 1 MHz EIS bandwidth, front-panel control, GPIB/Ethernet and free software.

SRS Extended warranty (2 extra years) for SG392

SRS Extended warranty (2 extra years) for SG394

SRS Extended warranty (2 extra years) for SG396

Rubidium frequency standard with 10 MHz and 5 MHz outputs, built-in distribution amplifier, GPS synchronisation via 1 pps and RS-232 interface.

Distribution amplifiers for 10 MHz reference with low phase noise, high isolation and up to 7 or 14 outputs, 50 Ω sine wave (+13 dBm).

GPS-disciplined 10 MHz reference with long-term stability better than 1×10⁻¹³, time tagging against UTC/GPS, multiple waveform outputs and network control.

GPS/GNSS-disciplined 10 MHz reference with dual-junction OCXO, low phase noise, five 10 MHz outputs, two 1 pps outputs and the option for extended frequency distribution.

Vacuum gauge controller for 1000 Torr to UHV, supporting ionisation, Pirani and capacitance gauges, with process and I/O functions.

Up to 500 mA output current,

Up to 100 mA output current,

337 nm nitrogen laser with 170 µJ pulse energy, 3.5 ns pulse width, up to 20 Hz repetition rate, internal or external triggering, and replaceable laser cartridge.

Teflon-based cleaning basket for up to four 1ʺ QCM crystals, designed for safe cleaning and surface treatment by immersion in a 100 ml beaker.

Cannot be used with O100MAX

Max. insertion nipple (4.5" CF)

Replacement filament with dual ThO₂/Ir design, offering a long service life, stable electron emission and the option of quick replacement by the user.

Automated melting point apparatus with PID temperature ramp, built-in camera, automatic and visual analysis, and USB for stand-alone or PC use.

All instrument functions can be controlled via the interfaces.

Rubidium-based timebase with oven-controlled SC-cut crystal oscillator, stability

10 MHz rubidium frequency standard with eight 75 Ω outputs, low phase noise, high stability and option for external reference and redundant power.

Convection-enhanced Pirani gauge for 1000 to 10⁻⁴ Torr, UHV-compatible, all-metal, bakeout to 250 °C, fast response and temperature compensation.

Standalone RGA controller for partial and total pressure measurement, with touchscreen, 8-channel control, pressure-time curves, analogue I/O and web interface.

Up to 100 amu for measurement at 0.01–10 Torr with fast response time, wide dynamic range and RGA Windows software.

Up to 200 amu for measurement at 0.01–10 Torr with fast response time, wide dynamic range and RGA Windows software.

Up to 300 amu for measurement at 0.01–10 Torr with fast response time, wide dynamic range and RGA Windows software.

10 MHz rubidium-disciplined reference with very low phase noise, Stratum 1 stability for up to 72 hours, 1 pps synchronisation and RS-232 for control and calibration.

Up to ±1.25 kV with 25 W output power, 1 V resolution, very low ripple, high regulation accuracy and programmable protection limits.

Up to ±2.5 kV with 25 W output power, 1 V resolution, very low ripple, high regulation accuracy and programmable protection limits.

Up to ±5.0 kV with 25 W output power, 1 V resolution, very low ripple, high regulation accuracy and programmable protection limits.

–100 V to –10 kV with 10 W output power, 1 mA maximum current, 1 V resolution, low ripple and programmable voltage and current limits.

+100 V to +10 kV with 10 W output power, 1 mA maximum current, 1 V resolution, low ripple and programmable voltage and current limits.

−100 V to −20 kV with 10 W output power, 0.5 mA maximum current, 1 V resolution, low ripple and programmable voltage and current limits.

+100 V to +20 kV with 10 W output power, 0.5 mA maximum current, 1 V resolution, low ripple and programmable voltage and current limits.

Modular temperature controller with up to 16 input channels, 6 PID loops, 1 mK resolution, 50 Hz sampling and USB/Ethernet/RS232 interfaces.

Quartz crystal microbalance measuring frequency and resistance for mass and viscosity analysis in thin films and liquids, with analogue output and PC/Mac control.

Up to 100 amu for gas analysis at 10 mbar–1 bar with fast response time, wide dynamic range and RGA Windows software.

Up to 200 amu for gas analysis at 10 mbar–1 bar with fast response time, wide dynamic range and RGA Windows software.

Up to 300 amu for gas analysis at 10 mbar–1 bar with fast response time, wide dynamic range and RGA Windows software.

Option with continuous dynode electron multiplier that increases sensitivity to 5 × 10⁻¹⁴ Torr and enables faster scanning compared to the standard Faraday detector.

Built-in power supply module for mains operation with LED status indication for electron multiplier, filament, electronics and probe.

Quadrupole-based residual gas analyzer up to 100 amu with high resolution, wide dynamic range, low detection limit and Windows/LabVIEW-based real-time analysis.

Quadrupole-based residual gas analyzer up to 200 amu with high resolution, wide dynamic range, low detection limit and Windows/LabVIEW-based real-time analysis.

Quadrupole-based residual gas analyzer up to 300 amu with high resolution, wide dynamic range, low detection limit and Windows/LabVIEW-based real-time analysis.