Time Electronics

Single-phase AC/DC source for voltage, current and power with independent V/I control, adjustable phase or power factor, and support for direct and CT/VT-based meter verification.

Automatic pressure regulator and calibrator -1 to 100 bar, up to 3 sensors, 0.01% FS accuracy, 0.003% FS stability and touchscreen with auto-ranging.

Regulated low-pressure calibrator with vacuum to 10 bar, 0.04% accuracy, integrated 24/36 V loop power supply, mA measurement and mains or battery operation.

Display and measurement of process loops with 4–20 mA, 0–10 V or up to 50 V, 0.05% accuracy, and RxSim and TxTest modes with internal loop power supply.

Measurement and simulation of process loops with 4–20 mA or 0–10 V, 7 fixed calibration points, 0.1% accuracy, and TxSim/RxTest modes with internal loop power.

Precision calibrator for voltage, current, resistance and temperature simulation with high accuracy and support for clamp meters and PC-controlled calibration.

Multifunction calibrator for voltage, current, resistance and temperature simulation with support for clamp meters and PC control.

Calibrator for RCD, loop and insulation testers; measures tripping, loop impedance and test current, with RS232/USB control and EasyCal support.

Generation of DC current up to 100 mA with 0.02% accuracy, built-in zero meter for precision measurement, and battery or mains operation for calibration and testing.

Passive simulation of PT100 in accordance with EN 60751 (ITS-90) with a temperature range of −200…+800 °C, 23 fixed setpoints and accuracy exceeding Class A.

Calibrator for oscilloscopes and timers/counters with accurate amplitude, frequency and time calibration, fast square wave (

Programmable source for precise ohm and RTD values with high resolution, wide resistance range and support for PC control via standard interfaces.

Measurement, simulation and generation of voltage and current loops with 0–50 mA or 0–21 V, automatic and manual stepping, and ramp function for process calibration.

Measurement and simulation of thermocouples, Pt100, µV, mV and mA for process calibration, −200…700 °C, up to 80 mA and 24 V loop supply.

mA simulation and load for testing transducers and process signals with current ranges up to 100 mA, 24 V line mode and 0.02% accuracy in battery-powered operation.

Loop calibrator for current and voltage with three ranges up to 22 mA / 22 V, 0.02% accuracy, step and ramp functions, and battery or mains operation.

Voltage and current simulation for loop and sensor testing with voltage ranges up to 1 V, current ranges up to 100 mA and 0.1% accuracy in battery-powered operation.

Generation of DC current up to 100 mA with 0.02% accuracy and adjustable drive voltage up to 40 V.

Multifunction calibrator with five DC voltage ranges up to 100 V, 100 mA current range, 0.005% basic accuracy and battery or mains operation.

Precision voltage calibrator with five ranges 0.01 µV–10 V, 0.02% basic accuracy, 30 mA output current, and mains and battery operation.

Rechargeable NiCd battery pack with eight cells and 230 V charger, intended for compatible Time instruments for mobile operation.

Portable mV generator with potentiometer, three ranges 1 µV–1 V, 0.02% basic accuracy, 20 mA output current and protective rubber case.

Portable voltage generator with three ranges 1 µV–1 V, 0.02% basic accuracy, 20 mA output current, short-circuit protection and rubber casing.

Measurement and generation of voltage up to 20 V and current up to 20 mA with 0.05% accuracy, plus 24 V compliance voltage for process loops.

Combined measurement and simulation of temperature and resistance with PT100 and 7 RTD types, 2-/3-/4-wire connection, and ramp and step functions.

7½-digit benchtop multimeter with DC accuracy of 0.0012%, AC bandwidth of 100 kHz and measurement ranges from nV to 10 kV, pA to 30 A and 10 nΩ to 1 GΩ.

Adjustable capacitance 10 pF–100 µF with 1% accuracy, 10 pF resolution and low residual capacitance for laboratory and educational use.

Adjustable capacitance 100 pF–10 µF with 1% accuracy and 100 pF resolution for laboratory and educational use.

Calibrator with five measurement ranges 0.2–2000 mΩ, gold-plated terminals and low thermal EMF, for calibrating high-current Ductor and micro-ohm instruments.

Resistance box with five fixed values: 1 Ω, 10 Ω, 100 Ω, 1 kΩ and 10 kΩ; ± 1 mΩ–1 Ω accuracy, 0.25 W per step and compact aluminium housing.

Precision resistance decade 10 mΩ–12 kΩ, ±0.01% accuracy, 6 decades, Pt100 simulation, low temperature coefficient (< 10 ppm/°C).

Power resistance decade 0.1 Ω–120 kΩ, 10 W total power, ±1% accuracy, low residual resistance < 20 mΩ and 500 V operating voltage.

Resistance decade 1 Ω–1.2 MΩ in 1 Ω steps, ±1% accuracy, 6 decade steps, low residual resistance < 150 mΩ and robust metal housing for laboratory use.

Resistance decade 0.01 Ω–1 MΩ, ±0.1–10% accuracy, 8-digit setting, < 90 mΩ residual resistance, 1 W per step and robust metal housing.

Resistance decade 0.01 Ω–1 kΩ in 0.01 Ω steps, ±0.1–10 % accuracy, 5-digit setting, low residual resistance and colour-coded scale units.

Resistance decade 1 Ω–100 MΩ in 1 Ω steps, ±0.1–1% accuracy, high stability, low temperature coefficient (50 ppm/°C) and protective rubber casing.

Adjustable inductance 1 mH–11.11 H with 1 mH resolution, 3% accuracy and high stability for laboratory and development use.

Multifunction calibrator with internal DMM for voltage, current, resistance, frequency and temperature, designed for the calibration of handheld and benchtop instruments.

AC/DC outputs up to 22 V and 220 mA with ramp function, PC control via SCPI and GPIB/RS-232/USB for ATE and automated test environments.

Calibrator for insulation testers up to 10 kV with a resistance range of 100 kΩ–100 GΩ, 1% accuracy, battery operation and touch-protected inputs.

Resistance range 100 kΩ–10 GΩ, test voltage up to 2.5 kV, battery operation, touch-protected connections and display of test voltage and test current.