Rohde & Schwarz

5 kHz–1 GHz EMI receiver for conducted and radiated measurements with automated scan ranges, reporting tools and extended analysis functions.

5 kHz–30 MHz receiver for conducted EMI testing with time domain scan, preselection and preamplifier functionality in line with CISPR 16-1-1.

100 MHz–1 GHz bandwidth, 12–18 bit resolution, up to 4.5 million waveforms/s and integrated MSO function with signal generator.

Basic measurements of voltage, current, power and THD. High accuracy from 50 µW. USB and Ethernet as standard.

Two-port analyzer from 5 kHz to 3 GHz with up to 130 dB dynamic range, 10.1″ multi-touch screen and support for spectrum and power measurement.

Frequency range 5 kHz–26.5 GHz, low DANL down to –158 dBm with preamplifier, –108 dBc/Hz phase noise, up to 40 MHz analysis bandwidth (optional).

5½-digit TRMS multimeter with 0.015% DC accuracy, 100 kHz AC bandwidth, 200 readings/s, USB and LAN interfaces, GPIB optional.

1–3 channels, up to 100 W total, 0–32 V per channel, up to 10 A, series/parallel operation and USB/LAN with optional GPIB.

Frequency range 5 kHz–14 GHz, low DANL down to –163 dBm with preamplifier, –108 dBc/Hz phase noise, up to 40 MHz analysis bandwidth (optional).

4- or 8-channel, 100 MHz–2 GHz bandwidth, 12-bit A/D with 18-bit HD mode, 500 Mpoints memory, >4.5 million wfms/s and >45,000 FFT/s.

2-channel linear power supply, 80 W total power, up to 200 V in series or 4 A in parallel, µA resolution and USB/Ethernet interface.

2-channel linear power supply, 80 W total power, up to 70 V in series or 12 A in parallel, µA resolution and USB/Ethernet interfaces.

Complete package with support for four power sensors, integrated reference source and touchscreen interface for CW and pulse power measurements.

4-channel 800 W DC power supply with up to 64 V and 10 A per channel, support for serial and parallel operation, and included trigger and analogue input options.

1-channel SMU with 0–20 V output, up to 8 A, 60 W source/sink power, load recovery < 30 µs and data acquisition with FastLog up to 500 kS/s.

2-channel DC power supply with 0–20 V/6 A per channel, 120 W output power, two-quadrant architecture for source/sink operation and high-speed logging up to 500 kS/s.

0.05% impedance accuracy, 10 Hz–10 MHz test frequency, ±0.03° phase measurement, DC bias up to 40 V, advanced analysis, binning, logging and RS232/USB/LAN.

1-channel SMU models with two- or four-quadrant architecture, up to 60 W source/sink power, fast load recovery < 30 µs and data acquisition up to 500 kS/s.

2-channel, 50 MHz bandwidth, 2 GSa/s, 2 Mpts memory, MSO with 8 digital channels and optional pattern generator.

Optional interface with both RS-232 and USB for instruments in the HMF, HMO, HMP and HMS series, installable in place of the standard HO732 interface.

4-channel oscilloscopes with bandwidths ranging from 200 MHz to 1.5 GHz, 12-bit A/D converters, up to 18-bit vertical resolution, 500 Mpoints of memory and 4.5 Mwfms/s.

DC–18 GHz, −35 dBm to +20 dBm measurement range, N-connector and operation via NRP2 base unit or direct USB connection to PC.

Two-line V-network for measuring interference voltage on single-phase EUTs, complies with CISPR 16-1-2 and EN 55016-1-2 for measuring conducted emissions.

Frequency range 5 kHz–8 GHz, typical DANL –163 dBm with preamplifier, TOI +10 dBm at 2.4 GHz, battery life >6 h, weight approx. 2.5 kg.

Frequency range 5 kHz–4 GHz, typical DANL –163 dBm with pre-amplifier, TOI +10 dBm at 2.4 GHz, battery life >6 hours, weight approx. 2.5 kg.

2-channel programmable power supply with up to 60 W per channel, 2-quadrant source/sink operation, fast load recovery

2-channel precision power supply with fast load regulation, 2-quadrant operation as source/sink, low ripple, high resolution and galvanically isolated, floating channels.

3-channel laboratory power supply with up to 32 V/3 A per channel, total 100 W, series connection up to 96 V, electronic protection and USB/LAN control.

Frequency range 5 kHz–7.5 GHz with EMI measurement functions, preamplifier, internal RF generator and CISPR-compliant detectors for conducted and radiated tests.

Frequency range 5 kHz–3 GHz with tracking generator, CW generator, preamplifier, VNA functions and advanced RF and modulation analysis.

4-channel oscilloscope with 300 MHz bandwidth, 10-bit ADC, 10 Msample memory, 2.5 GSa/s sampling rate and RTC-B6 function generator.

Frequency range 5 kHz–7.5 GHz, low DANL down to –166 dBm with preamplifier, –108 dBc/Hz phase noise, support for spectrum, signal and EMI analysis.

Frequency range 5 kHz–3 GHz, low DANL down to –166 dBm with preamplifier, –108 dBc/Hz phase noise, support for spectrum, signal and EMI analysis.

Base unit with touchscreen and intuitive GUI. Supports up to four current sensors. Displays multiple measurement results simultaneously. Customisable display panel.

2-channel DC power supply 0–32 V/3 A, 66 W total power, low ripple, OVP/OCP/OPP protection, series and parallel operation, and USB interface with optional LAN and WiFi.

19-inch 2U rack-mounting kit for mounting one or two units from the NGE and HMC series whilst maintaining cooling and ensuring a secure fit.

Rack mounting kit for mounting the Rohde & Schwarz HMP4040 and HMP4030

Spectrum analyzer 5 kHz–1 GHz with tracking generator, built-in VSWR bridge and vector network analysis, upgradeable to 2 GHz or 3 GHz.

Software option that extends the upper frequency range from 2 GHz to 3 GHz for compatible spectrum analyzers in the FPC series.

Licence key for upgrading the FPC1000 spectrum analyzer from 1 GHz to 2 GHz.

Spectrum analysis from 5 kHz to 1 GHz, upgradeable to 3 GHz, with 1 Hz bandwidth setting, low noise level, Wi-Fi control and 10.1″ WXGA screen.

Software licence for R&S®RTB models enabling serial triggering and decoding of I²C and SPI buses with colour-coded display and time-correlated analysis.

Software package combining serial triggering and decoding for I²C/SPI, UART and CAN/LIN, history and segmented memory, and an arbitrary waveform generator.

Software option for generating arbitrary waveforms and 4-bit patterns up to 50 Mbit/s, with support for CSV import as well as I2C, SPI, UART and CAN/LIN.

4-channel oscilloscope with 300 MHz bandwidth, 10-bit ADC, 10 Msample memory, 2.5 GSa/s sampling rate and 10.1" touchscreen with gesture support.

Bandwidth upgrade from 50 MHz to 70 MHz for the RTC-1002 oscilloscopes.

Bandwidth upgrade from 50 MHz to 100 MHz for the RTC-1002 oscilloscopes.

Bandwidth upgrade from 50 MHz to 200 MHz for the RTC-1002 oscilloscopes.

Bandwidth upgrade from 50 MHz to 300 MHz for the RTC-1002 oscilloscopes

2-channel oscilloscope with 100 MHz bandwidth, 2 GSa/s sampling rate, 2 Ms memory depth and integrated RTC-B6 function generator.

2-channel oscilloscope with 70 MHz bandwidth, 2 GSa/s sampling rate, 2 Ms memory depth and integrated RTC-B6 function generator.

2-channel oscilloscope with 50 MHz bandwidth, 2 GSa/s sampling rate, 2 Ms memory depth and integrated RTC-B6 function generator.

2-channel oscilloscope with 200 MHz bandwidth, 1 GSa/s sampling rate, 2 Mpts memory depth, 8-bit ADC and built-in function generator RTC-B6.

Software package containing the serial trigger and decoding options RTC-K1 (I²C/SPI), RTC-K2 (UART/RS-232/RS-422/RS-485) and RTC-K3 (CAN/LIN).

Protective and durable case with dual compartments, designed for oscilloscopes in the HMO7xx, 1xxx, 15xx, 20xx and RTC1000 series.