BK Precision

RF signal generator up to 3 GHz combined with an 80 MHz AWG/function generator, 16-bit resolution, 250 MSa/s, 4 Mpts waveform memory and GPIB.

Software license for the BK Precision DAS1820 enabling PTPv2/IEEE 1588 time synchronisation with compatible devices over Ethernet.

8-channel multiplexed module for DAS1800 and DAS1820 with isolated inputs, up to ±60 VDC, and support for voltage, current, thermocouple, and RTD measurements.

4-channel high-impedance module for DAS1800 and DAS1820 with isolated inputs, up to ±600 VDC, 1 MSa/s per channel, and support for voltage, current, and thermocouple measurements.

4-channel universal measurement module for DAS1820 with isolated inputs, up to ±600 VDC, 1 MSa/s per channel, and support for voltage, current, and thermocouple measurements.

Modular data acquisition system with up to 16 analog channels at 1 MSa/s, measurement support up to ±1500 VDC, power analysis, and 500 GB SSD storage.

Programmable AC power source with 0–300 V output, 45–500 Hz frequency range, 1000 VA output power, list programming and USB/RS232 interfaces.

Programmable DC electronic load 150 V/250 A/2 kW with CC/CV/CR/CW modes, transient operation, and USB/LAN/RS232/GPIB interfaces.

Modular 3-slot data acquisition system with built-in 6½-digit DMM, up to 120 channels, 100 kpts memory, and LAN and USB.

20 kW DC power supply 800 V/25 A with 400 VAC input, 5" touchscreen, < 3 ms transient response, 94% efficiency, RS232/LAN, master/slave and advanced protection functions.

3 GHz frequency measurement with 10-digit resolution, AC/DC switching, variable threshold, multiple measurement modes and USB control for flexible signal analysis.

600 W mainframe for up to four output channels, support for modular DC power supplies, series/parallel connection and USB/LAN/GPIB control.

2-channel generator with 1 mHz–30 MHz frequency range, 250 MSa/s sampling rate, 16-bit resolution and support for AM/FM/PM/FSK/BPSK modulation.

High-voltage power supply with multi-range output, 0 – 160 V / 0 – 120 A, 3 kW power, low ripple, adjustable rise times, remote control via LAN, USB and GPIB.

3-channel programmable DC power supply 32 V/8 A/300 W with multi-range operation, list mode, data logging function, USB and LAN interfaces.

0–60 V, 0–10 A, 200 W multi-range,

0–60 V, 0–10 A, 200 W multi-range,

0–60 V, 0–4 A, 120 W multi-range,

0–60 V, 0–4 A, 120 W multi-range,

0–32 V, 0–8 A, 120 W multi-range,

0–32 V, 0–8 A, 120 W multi-range,

1-channel battery simulator and DC power supply, 150 W, 2-quadrant operation with source/sink, variable 0–1 Ω output impedance and USB/LAN.

2-channel battery simulator and DC power supply, 2×45 W (90 W total), 2-quadrant operation with source/sink, variable 0–1 Ω output impedance and USB/LAN.

2-channel isolated, 200 MHz bandwidth, 1 GSa/s, up to 12 Mpts memory, 6000-count DMM and CAT II 1000 V/CAT III 600 V.

2-channel isolated, 100 MHz bandwidth, 1 GSa/s, up to 12 Mpts memory, 6000-count DMM and CAT II 1000 V/CAT III 600 V.

2-channel, 200 MHz bandwidth, 1 GSa/s, up to 12 Mpts memory, 6000-count DMM and USB connection.

2-channel, 100 MHz bandwidth, 1 GSa/s, up to 12 Mpts memory, 6000-count DMM and USB connection.

0–1950 V, up to 27 A, 18 kW, multi-range operation for full power across V/A combinations, adjustable ramp functions and USB/LAN (LXI) with optional GPIB/analogue.

0–500 V, up to 108 A, 18 kW, multi-range operation for full power across V/A combinations, adjustable ramp functions and USB/LAN (LXI) with optional GPIB/analogue.

0–1300 V, up to 23 A, 10 kW, multi-range operation for full power across V/A combinations, adjustable ramp functions and USB/LAN (LXI) with optional GPIB/analogue.

0–650 V, up to 46 A, 10 kW, multi-range operation for full power across V/A combinations, adjustable ramp functions and USB/LAN (LXI) with optional GPIB/analogue.

0–80 V, up to 360 A, 10 kW, multi-range operation for full power across V/A combinations, adjustable ramp functions, and USB/LAN (LXI) with optional GPIB/analogue.

Rack mounting kit for DAQ3120, accommodates up to two systems and occupies 2U in a standard 19-inch rack.

8-channel high-voltage multiplexer with 2 additional current channels up to 2 A, 2- and 4-wire measurement, up to 60 channels/s and 600 VDC max.

4×8 matrix switch with 32 crosspoints, 2-wire switching, 300 V/1 A max and expandable up to 96 crosspoints.

40-channel single-ended multiplexer with up to 80 channels/s, common signal ground isolated up to 300 V and support for 2-wire measurement.

20-channel multiplexer with two 10-channel banks, 2 additional current channels up to 1 A, 2- and 4-wire measurement, up to 80 channels/s and 300 V maximum input voltage.

20-channel solid-state multiplexer with two 10-channel banks, up to 450 channels/s, 2- and 4-wire measurement, and 120 V maximum input voltage.

Multi-channel modular load system up to 4800 W and 16 channels with CC/CV/CR/CW modes, 16-bit resolution, list mode and remote control via LAN/USB/RS232/GPIB.

DC–1 MHz bandwidth, up to 30 Vpp output, adjustable gain x1–x10, 50 Ω and 600 Ω outputs, −20 dB attenuation and clipping indication.

4-channel high-voltage input module for DAS1800 and DAS1820 with isolated differential inputs, up to ±1500 VDC or 1000 Vrms, and 1 MSa/s per channel.

Solar radiation meter for 0–1,999 W/m² or 0–634 BTU/(ft²·h), with detachable sensor, MIN/MAX/HOLD and tripod mount for remote measurement.

Programmable DC loads up to 1000 V/300 A/6 kW with CC/CV/CR/CW modes, parallel connection up to 60 kW, 10 kHz transient mode, USB/LAN/RS232/GPIB and 4.3" LCD screen.

Programmable DC loads up to 1000 V/150 A/3 kW with CC/CV/CR/CW modes, parallel connection up to 30 kW, 10 kHz transient mode, USB/LAN/RS232/GPIB and 4.3" LCD screen.

30 MHz bandwidth, up to 1400 V differential (DC + AC peak), selectable attenuation 20×/200×, 1000 V CAT III, and battery, USB or mains adapter operation.

30 MHz bandwidth, up to 700 V differential (DC + AC peak), selectable attenuation 10×/100×, 1000 V CAT III, and battery, USB or mains adapter operation.

Modular data acquisition system with up to 40 channels at 1 MSa/s, support for thermocouples and RTDs, advanced time synchronisation and 2 TB internal SSD storage.

150 V, 60 A, 350 W, CC/CV/CR/CW modes, transient response up to 20 kHz and RS-232 control.

150 V, 30 A, 175 W, CC/CV/CR/CW modes, transient up to 20 kHz and RS-232 control.

Red and black cable set with #10 cable lugs for 3" battery clamps, 0.75 m length and 30 A rated current for power supplies with threaded connection posts.

Red and black lab lead set with alligator clips, 6/4 mm spade terminals, 4 mm banana adaptors and sense leads, rated current up to 36 A depending on accessories.

Rack mounting kit for selected 2U models, designed for installation in 19-inch racks.

Handheld data acquisition system with 6 isolated channels, 1 MS/s sampling rate, 100 kHz bandwidth, 14-bit resolution and CAT III 600 V rating.

6-channel data logger expandable to 72 channels with a sampling rate of 1 MSa/s, modular measurement inputs, 500 GB internal storage and 16 digital inputs.

Modular handheld data logger with 20–200 analogue channels, 16-bit resolution, 1 ms sampling rate and support for voltage, temperature, current and resistance.

120 V, 60 A, 250 W, CC/CV/CR/CW modes, transient up to 25 kHz, 16-bit measurement and USB, RS-232 and GPIB control.

120 V, 30 A, 150 W, CC/CV/CR/CW modes, transient up to 25 kHz, 16-bit measurement and USB, RS-232 and GPIB control.

0–300 V, up to 6 A, 750 VA, 45–500 Hz, adjustable phase angle, PLD and sweep modes, and LAN/USB/RS-232/GPIB control.

5½-digit TRMS multimeter with 0.010% DC accuracy, 1 MHz AC bandwidth, 1000 readings/s and USB, LAN and RS232 interfaces.

6½-digit TRMS multimeter with 0.0035% DC accuracy, 1 MHz AC bandwidth, 1000 readings/s and USB, LAN and RS232 interfaces.