Sale

4 voltage and 4 current inputs, including 4 MA193 current clamps. Designed for demanding analysis and logging of all energy and power parameters

Magnetic accessory for insulation testing that connects phase and neutral conductors via a common test point, 4 magnetic probes, IEC 61010 CAT III 600 V and max 4 A.

Solar radiation meter for measuring W/m² in accordance with IEC 62446-1, with ambient and PV module temperature measurement, as well as a compass and tilt function.

Tester with FieldSense technology for non-contact measurement of AC voltage, current and frequency, as well as simultaneous display of voltage and current.

100 kHz–110 GHz with compatible sensors, up to 200 readings/s via GPIB, support for 8480 and E-series sensors, and GPIB/RS232 interfaces.

500 MHz bandwidth, 10:1 attenuation, 10 MΩ input impedance and 9.5 pF capacitance, max 400 V and 2.5 mm probe diameter.

1 GHz bandwidth, 1 MΩ input resistance and 0.9 pF capacitance, ±8 V dynamic range, and ProBus interface for LeCroy oscilloscopes.

Up to 2,000 V DC, 1,500 V AC TRMS and 1,500 A AC/DC, with inrush current, min/max, Bluetooth and remote monitoring via app.

50–290 V operating voltage, 10–1000 mA test range, ramp test and automatic test sequence, backlit LCD and IP54-rated housing.

Red, 4 mm banana plug with quick-connect for DIY installation, up to 20 A, 600 V CAT II / 300 V CAT III / 150 V CAT IV, reinforced insulation.

Red, stackable 4 mm banana plug (male) for DIY, solderless screw-type wire terminal, intended for maintenance and repair of test leads.

Red, 4 mm safety lab plug with spring-loaded touch protection, tool-free quick connection of connecting wire, for 33 V AC / 70 V DC, up to 36 A.

Wall-mounted holder for test leads with separate rows for BNC, 2 mm and 4 mm cables, metal construction, 26 cm wide, for organised storage.

100 cm PVC lab lead with 4 mm stackable banana plugs and spring-loaded insulating sleeve, 12 A rated current, 600 V CAT II, white.

150 cm PVC test lead with 4 mm stackable banana plugs and spring-loaded insulating sleeve, 12 A rated current, 600 V CAT II, white.

200 cm PVC test lead with 4 mm stackable banana plugs and spring-loaded insulating sleeve, 12 A rated current, 600 V CAT II, red.

25 cm PVC test lead with 4 mm stackable banana plugs and spring-loaded insulating sleeve, 12 A rated current, 600 V CAT II, red.

50 cm PVC test lead with 4 mm stackable banana plugs and spring-loaded insulating sleeve, 12 A rated current, 600 V CAT II, yellow.

Stackable lab lead with fixed insulating sleeve, PVC insulation, 4 mm banana plugs, length 100 cm, 12 A rated current and 1000 V CAT III rating, red.

Red, 4 mm female–female connector/extension, 1000 V CAT III, 600 V CAT IV, reinforced insulation, up to 36 A.

Black, 4 mm female-to-female connector/extension, 1000 V CAT III, 600 V CAT IV, reinforced insulation, up to 36 A.

Test probe with 4 mm spring-loaded banana plug and 4 mm female connector for test lead, nickel-plated brass tip, 36 A, CAT II 1000 V, reinforced insulation, green.

Spring-loaded fine-tip probe 0.75 mm for SMD and high-density measurement, 4 mm female connector, 1 A, 600 V CAT II, reinforced insulation, red.

Black screw-type alligator clip for fused test probes with fixed attachment, reinforced insulation and marking up to CAT IV 600 V, 36 A.

Red test probe with spring-return contact guard, 4 mm test tip and 4 mm female banana plug, reinforced insulation for 1000 V CAT II and rated current 20 A.

Black fused test probe with spring-loaded touch guard over a 4 mm pointed tip and 4 mm female connector for test lead. Fuse 0.5 A/1000 V, 1000 V CAT III.

Red fused test lead with spring-loaded touch guard, pointed 4 mm probe and 120 cm fixed cable with angled 4 mm male connector. Fuse 0.5 A/1000 V, 1000 V Cat. II.

Insulated alligator clip with 4 mm connection, 25 mm jaw opening and 20 A rated current, complies with 1000 V CAT III / 600 V CAT IV.

Large, touch-protected alligator clip with 4 mm female connector, 32 mm opening and 36 A rated current for safe connection during laboratory measurements.

Very heavy-duty insulated crocodile clip with 4 mm connection, 41 mm jaw opening and 36 A rated current, complies with 1000 V CAT III / 600 V CAT IV.

Insulated test lead with alligator clip and 4 mm straight male connector, 150 cm long, 10 A rated current, complies with 5000 V CAT I / 1000 V CAT II / 1000 V CAT III.

Flexible test clamp with thin gripping jaw for 4 mm safety-rated cables, reinforced insulation, 6 A rated current, 1000 V CAT II, length 159 mm.

Red with a bendable, flexible clamp and touch-protected jaws for 4 mm banana connection, 6 A, 1000 V CAT II/III and 600 V CAT IV.

Red flexible alligator clip with strong gripping jaw and 4 mm female banana plug, flexible insulated construction, 1000 V CAT II, 6 A.

BNC male to 4 mm banana sockets, 2 axial and 2 radial sockets plus 2 wire connections (2 mm holes) for flexible measurement connection.

BNC T-adapter for signal branching with 1 male and 2 female connectors, designed for parallel connection of measuring instruments or signal paths.

Insulated BNC male to dual 4 mm banana sockets, 500 V CAT I / 150 V CAT III, rated current 3 A for connecting test leads.

Insulated BNC female to two 4 mm banana plugs (male), 500 V CAT I / 150 V CAT III, reinforced insulation and 3 A rated current.

BNC-connected test lead with 2 flexible mini-clamps for signal measurement, silicone-insulated cable 0.40 mm² and cable length 25 cm.

Red insulated BNC test lead for oscilloscopes and measuring instruments with 50 Ω impedance, 2 m length, safety-rated up to 600 V CAT III.

Red insulated BNC test lead for oscilloscopes and measuring instruments with 50 Ω impedance, 1 m length, safety rated up to 600 V CAT III.

BNC test cable for measuring instruments with 2 small clamps, 50 Ω impedance, 2 m length, max 33 V AC/70 V DC and 3 A for low-voltage measurements.

Red, insulated adapter with 4 mm female to 4 mm spring-loaded tip, for 33 V AC / 70 V DC, up to 10 A.

Adapter with 4 mm banana socket (female) to 2 mm banana plug (male), 33 V AC / 70 V DC, 36 A, red.

Adapter for measurement in 16 A CEE sockets with simultaneous access to up to 5 conductors via 4 mm banana plugs, 415 V AC CAT IV and 16 A rated current.

Adapter for measurement in 32 A CEE sockets with simultaneous access to up to 5 conductors via 4 mm banana plugs, 415 V AC CAT IV and 32 A rated current.

Adapter for measurement in 63 A CEE sockets with simultaneous access to up to 5 conductors via 4 mm banana plugs, 415 V AC CAT IV and 63 A rated current.

Adapter for connecting a BNC signal to dual 4 mm banana plugs with a maximum of 33 V AC / 70 V DC, designed for measurement with standard multimeters.

Red, magnetic adapter with round magnetic head and 4 mm female banana plug, 1500 V CAT III, 4 A, reinforced insulation for safe measurement connection to steel screws.

4-channel, 100 MHz bandwidth, up to 2 GSa/s, 14 Mpts memory (expandable to 140 Mpts), FFT and USB host/device.

4-channel oscilloscope with 500 MHz bandwidth, 10 GSa/s sampling rate, 100 Mpts memory depth and 10.1" touchscreen for high-frequency measurements.

Frequency range 800 MHz–4 GHz for S11 measurements of VSWR, return loss and reflection coefficient in conjunction with the DSA800 series spectrum analyzers.

4-channel oscilloscope with 300 MHz bandwidth, 10-bit ADC, 10 Msample memory, 2.5 GSa/s sampling rate and 10.1" touchscreen with gesture support.

4-channel oscilloscope with 300 MHz bandwidth, 10-bit ADC, 10 Msample memory, 2.5 GSa/s sampling rate and RTC-B6 function generator.

Accessory kit containing 16 cable holders, 2 test hooks and 4 short cables for SP10, SP100 and SP200 probes.

4 PCBite holders, 2 SP100 100 MHz 10:1 oscilloscope probes and A4 base plate for hands-free measurement with an oscilloscope.

LISN with 5 µH inductance and 50 A capacity for DC-powered devices, 150 kHz–110 MHz measurement range, in accordance with CISPR 16-1-2 and related standards.