BNC

BNC to dual 4 mm banana plugs, 1.2 m cable for connection between BNC socket and measuring instrument.

Attenuator set with 3, 6, 10 and 20 dB, DC–1 GHz bandwidth, 50 Ω impedance, 1 W power and BNC male-to-female connection.

Feed-through terminator, DC–1 GHz bandwidth, 50 Ω impedance, 1 W power and BNC male-to-female connection.

Tweezers probe with BNC male connector for signal measurement on small components, 1 m RG174 cable and colour-coded clamps for laboratory and electronics measurements.

Insulated adapter with BNC connector to two 2 mm sockets, rated for 500 V CAT I / 150 V CAT III and 3 A rated current for connecting laboratory cables.

BNC male to 4 mm banana sockets, 2 axial and 2 radial sockets plus 2 wire connections (2 mm holes) for flexible measurement connection.

BNC T-adapter for signal branching with 1 male and 2 female connectors, designed for parallel connection of measuring instruments or signal paths.

Insulated BNC male to dual 4 mm banana sockets, 500 V CAT I / 150 V CAT III, rated current 3 A for connecting test leads.

Insulated BNC female to two 4 mm banana plugs (male), 500 V CAT I / 150 V CAT III, reinforced insulation and 3 A rated current.

BNC-connected test lead with 2 miniature hook clamps for signal measurement, silicone-insulated cable 0.40 mm² and cable length 25 cm.

BNC-connected test lead with 2 flexible mini-clamps for signal measurement, silicone-insulated cable 0.40 mm² and cable length 25 cm.

Red insulated BNC test lead for oscilloscopes and measuring instruments with 50 Ω impedance, 2 m length, safety-rated up to 600 V CAT III.

Red insulated BNC test lead for oscilloscopes and measuring instruments with 50 Ω impedance, 1 m length, safety rated up to 600 V CAT III.

50 Ω BNC-to-banana cable with two 4 mm stackable connectors, 2 m long, black, flexible conductor for precision measurement, 600 V CAT III / 1000 V CAT II.

BNC test cable for measuring instruments with 2 small clamps, 50 Ω impedance, 2 m length, max 33 V AC/70 V DC and 3 A for low-voltage measurements.

Adapter for connecting a BNC signal to dual 4 mm banana plugs with a maximum of 33 V AC / 70 V DC, designed for measurement with standard multimeters.

Fixed RF attenuator for signal generators with 40 dB attenuation, designed for level matching and protection during RF and microwave measurements.

RF adapter kit with BNC and coaxial adapters for connecting and adapting RF and oscilloscope accessories.

Attenuator set with four 50 Ω attenuators at 3, 6, 10 and 20 dB (1 GHz) and an HZ22 terminator, intended for precision measurements and RF matching.

High-speed pulse generator for time-domain measurements, 100 ps rise time (20–80%), 0.5–2.0 V output and controlled pulse distortion for bandwidth testing.

RF attenuator set DC–3 GHz, 2 W with 3, 6, 10 and 20 dB attenuators, VSWR

N-male/N-female for laboratory and test applications, DC–3 GHz frequency range, 10 W power rating and 3 dB attenuation.

N-male/N-female for laboratory and test applications, DC–3 GHz frequency range, 100 W power rating and 3 dB attenuation.

N-male/N-female for laboratory and test applications, DC–3 GHz frequency range, 25 W power rating and 3 dB attenuation.

N-male/N-female for laboratory and test applications, DC–3 GHz frequency range, 50 W power rating and 3 dB attenuation.

Coaxial adapter set with 44 x 50 Ω adapters, N-, SMA-, BNC-, SMB- and RCA-combinations in a storage box, for RF and HF measurement applications.

50 Ω load with N-connector (male), 25 W power, frequency range DC – 3 GHz, VSWR < 1.2.