Electro-PJP

Red, magnetic adapter with round magnetic head and 4 mm female banana plug, 1500 V CAT III, 4 A, reinforced insulation for safe measurement connection to steel screws.

White, 200 cm laboratory lead with angled 4 mm safety banana plugs, 1000 V CAT IV, up to 36 A depending on conductor area, 10 pcs/pack.

White, 150 cm laboratory lead with angled 4 mm safety banana plugs, 1000 V CAT IV, up to 36 A depending on conductor area, 10 pcs/pack.

White, 100 cm laboratory lead with angled 4 mm safety banana plugs, 1000 V CAT IV, up to 36 A depending on conductor area, 10 pcs/pack.

200 cm test lead with straight and angled 4 mm banana plugs (male), rated 1000 V CAT IV, 1.50 mm² 25 A, 10 pcs/pack, white.

150 cm test lead with straight and angled 4 mm banana plugs (male), rated 1000 V CAT IV, 1.00 mm² 20 A, 10 pcs/pack, white.

100 cm test lead with straight and angled 4 mm banana plugs (male), rated 1000 V CAT IV, 0.75 mm² 12 A, 10 pcs/pack, black.

Blue, 200 cm test lead with straight 4 mm safety banana plugs, 1000 V CAT IV, up to 36 A depending on conductor cross-section, 10 pcs/pack.

White, 100 cm test lead with straight 4 mm safety banana plugs, 1000 V CAT IV, up to 36 A depending on conductor cross-section, 10 pcs/pack.

Red spring-return insulated gripping jaw for high currents, 20 A, 1000 V CAT IV, fits 4 mm banana plugs, for cables up to 50 mm².

Black test probe with fine steel tip, moulded protection and Ø4 mm safety connection, rated voltage 1,000 V CAT IV and rated current 16 A.

Adapter with 4 mm banana socket (female) to 2 mm banana plug (male), 33 V AC / 70 V DC, 36 A, red.

Red, insulated adapter with 4 mm female to 4 mm spring-loaded tip, for 33 V AC / 70 V DC, up to 10 A.

Very small and precise micro-tweezers clamp with 0.8 mm pins, ideal for SMD testing, 33 V AC / 70 V DC, 500 mA, supplied in packs of 10.

Red flexible alligator clip with strong gripping jaw and 4 mm female banana plug, flexible insulated construction, 1000 V CAT II, 6 A.

Red with a bendable, flexible clamp and touch-protected jaws for 4 mm banana connection, 6 A, 1000 V CAT II/III and 600 V CAT IV.

Flexible test clamp with thin gripping jaw for 4 mm safety-rated cables, reinforced insulation, 6 A rated current, 1000 V CAT II, length 159 mm.

Insulated test lead with alligator clip and 4 mm straight male connector, 150 cm long, 10 A rated current, complies with 5000 V CAT I / 1000 V CAT II / 1000 V CAT III.

Very heavy-duty insulated crocodile clip with 4 mm connection, 41 mm jaw opening and 36 A rated current, complies with 1000 V CAT III / 600 V CAT IV.

Insulated alligator clip with 4 mm connection, 25 mm jaw opening and 20 A rated current, complies with 1000 V CAT III / 600 V CAT IV.

Black fused test probe with spring-loaded touch guard over a 4 mm pointed tip and 4 mm female connector for test lead. Fuse 0.5 A/1000 V, 1000 V CAT III.

Red test probe with spring-return contact guard, 4 mm test tip and 4 mm female banana plug, reinforced insulation for 1000 V CAT II and rated current 20 A.

Spring-loaded fine-tip probe 0.75 mm for SMD and high-density measurement, 4 mm female connector, 1 A, 600 V CAT II, reinforced insulation, red.

Test probe with 4 mm spring-loaded banana plug and 4 mm female connector for test lead, nickel-plated brass tip, 36 A, CAT II 1000 V, reinforced insulation, green.

Red, 150 cm silicone test lead with straight–angled 4 mm banana plug, AWG15 (1.5 mm²), up to 36 A, 1000 V CAT III / 600 V CAT IV, 10 pcs/pack.

Black, 100 cm silicone lab lead, AWG18 (0.75 mm²), stackable with spring-return insulating sleeve, 12 A, 600 V CAT II, temperature range −60 to +180 °C, 10 pcs/pack.

50 cm PVC test lead with 4 mm stackable banana plugs and spring-loaded insulating sleeve, 12 A rated current, 600 V CAT II, 10 pcs/pack, yellow.

25 cm PVC test lead with 4 mm stackable banana plugs and spring-loaded insulating sleeve, 12 A rated current, 600 V CAT II, 10 pcs/pack, red.

200 cm PVC test lead with 4 mm stackable banana plugs and spring-loaded insulating sleeve, 12 A rated current, 600 V CAT II, 10 pcs/pack, red.

150 cm PVC test lead with 4 mm stackable banana plugs and spring-loaded insulating sleeve, 12 A rated current, 600 V CAT II, 10 pcs/pack, white.

100 cm PVC lab lead with 4 mm stackable banana plugs and spring-loaded insulating sleeve, 12 A rated current, 600 V CAT II, 10 pcs/pack, white.

Red, 4 mm safety lab plug with spring-loaded touch protection, tool-free quick connection of connecting wire, for 33 V AC / 70 V DC, up to 36 A.

Red, stackable 4 mm banana plug (male) for DIY, solderless screw-type wire terminal, intended for maintenance and repair of test leads.

Red, 4 mm banana plug with quick-connect for DIY installation, up to 20 A, 600 V CAT II / 300 V CAT III / 150 V CAT IV, reinforced insulation.

Black flexible test lead for access to tight measurement points with 1.8 mm tip, 4 mm female banana plug, 86 mm length and rated at 33 V AC/70 V DC, 10 A.

Red insulated BNC test lead for oscilloscopes and measuring instruments with 50 Ω impedance, 1 m length, safety rated up to 600 V CAT III.

Red insulated BNC test lead for oscilloscopes and measuring instruments with 50 Ω impedance, 2 m length, safety-rated up to 600 V CAT III.

Red fused test lead with spring-loaded touch guard, pointed 4 mm probe and 120 cm fixed cable with angled 4 mm male connector. Fuse 0.5 A/1000 V, 1000 V Cat. II.

Black screw-type alligator clip for fused test probes with fixed attachment, reinforced insulation and marking up to CAT IV 600 V, 36 A.

Adapter for measurement in 63 A CEE sockets with simultaneous access to up to 5 conductors via 4 mm banana plugs, 415 V AC CAT IV and 63 A rated current.

Adapter for measurement in 32 A CEE sockets with simultaneous access to up to 5 conductors via 4 mm banana plugs, 415 V AC CAT IV and 32 A rated current.

Adapter for measurement in 16 A CEE sockets with simultaneous access to up to 5 conductors via 4 mm banana plugs, 415 V AC CAT IV and 16 A rated current.

Adapter for connecting a BNC signal to dual 4 mm banana plugs with a maximum of 33 V AC / 70 V DC, designed for measurement with standard multimeters.

Earth probe for earth resistance and continuity measurement with 4 mm banana plug, 23 cm length, rust-protected zinc coating and rating 33 V AC/70 V DC, 20 A.

Cable reel for continuity and protective conductor testing with 30 m safety test lead, belt for hands-free operation and CAT III 1000 V/CAT IV 600 V.

Measurement kit with Wheel-e continuity tester, PerchTele telescopic probe and case for continuity testing of protective conductors and equipotential bonding.

Protective, high-quality carrying case designed for telescopic probes. Dimensions: 86 × 47 cm for safe and convenient storage during transport.

Carrying case for telescopic probes, accessories and cable reels with four separate compartments for organised storage. Dimensions: 53 × 16 × 23 cm.

BNC T-adapter for signal branching with 1 male and 2 female connectors, designed for parallel connection of measuring instruments or signal paths.

BNC-connected test lead with 2 flexible mini-clamps for signal measurement, silicone-insulated cable 0.40 mm² and cable length 25 cm.

BNC-connected test lead with 2 miniature hook clamps for signal measurement, silicone-insulated cable 0.40 mm² and cable length 25 cm.

Tweezers probe with BNC male connector for signal measurement on small components, 1 m RG174 cable and colour-coded clamps for laboratory and electronics measurements.

Micro test kit with 0.8 mm connectors comprising 12 micro clips in 6 colours, 6 holders and 12 micro leads for measuring small components.

Micro test kit for measuring small components with 0.8 mm connections, Challenger clips in 6 colours, holders and adaptors for 4 mm, supplied in a compartmentalised box.

Heavy-duty earth spike with screw tip and 4 mm banana plug connection, zinc-plated for corrosion protection, 33 V AC / 70 V DC, 36 A, length 420 mm. MOQ 5

Continuity tester and ohmmeter with integrated 30 m cable reel, test current 200 mA, measuring range 0–20 ohms, audible and visual indication, and digital display.

Insulated BNC female to two 4 mm banana plugs (male), 500 V CAT I / 150 V CAT III, reinforced insulation and 3 A rated current.

BNC test cable for measuring instruments with 2 small clamps, 50 Ω impedance, 2 m length, max 33 V AC/70 V DC and 3 A for low-voltage measurements.

50 Ω BNC-to-banana cable with two 4 mm stackable connectors, 2 m long, black, flexible conductor for precision measurement, 600 V CAT III / 1000 V CAT II.

Magnetic accessory for insulation testing that connects phase and neutral conductors via a common test point, 4 magnetic probes, IEC 61010 CAT III 600 V and max 4 A.