Current Probes

AC currents up to 9,000 A, high accuracy up to 3,000 A, wide frequency range, BNC connection and voltage output 1/10/100 mV/A.

Measuring range 10 mA–100 A AC/DC with 1 MHz bandwidth, BNC output for oscilloscopes, 26 mm jaw opening, rechargeable battery and selectable filters 3 kHz/30 kHz.

Flexible AC current sensor 0.5 A–3 kA with Rogowski coil, 1 MHz bandwidth, 3 V output signal and 17 cm measuring loop with BNC connection.

Flexible AC current sensor 0.5 A–3 kA with Rogowski coil, 1 MHz bandwidth, 3 V output signal and 25 cm measuring loop with BNC connection.

Flexible AC current sensor 0.5 A–3 kA with Rogowski coil, 1 MHz bandwidth, 3 V output signal and 35 cm measuring loop with BNC connector.

AC current clamp, 1–500 A range (1200 A peak), 10 mV/A output via BNC, 5 Hz–10 kHz bandwidth and 1.5 m double-insulated cable.

AC current clamp with 20 A/200 A measurement range, 10 mV/A and 100 mV/A output, BNC connection, frequency range 40 Hz–10 kHz and CAT III 600 V.

AC flexible current probe based on the Rogowski principle, 30 A/300 A/3000 A measurement range, 1/10/100 mV/A output, 610 mm flexible loop and CAT III 600 V.

AC Rogowski-type current probe, 30 A/300 A/3000 A measurement range, 1/10/100 mV/A output, 915 mm flexible loop and CAT III 600 V.

Rogowski current probe with compact coil, Hz–MHz bandwidth, 60 A–300 kA peak current, low droop and predictable phase response for 50/60 Hz and pulse measurements.

Rogowski current probe with 0.1 Hz–16 MHz bandwidth, 600 A–60 kA peak current, 40 kA/µs di/dt, 10 kV insulation and flexible clamp coil.

Rogowski current probe with 1.6 mm thin coil, Hz–30 MHz bandwidth, 30 A–30 kA peak current, up to 100 kA/µs di/dt and BNC output.

DC current probe for temporary measurements, 2–40 kA, single-shot with ±1% accuracy and analogue BNC output for DMM or oscilloscope.

Flexible AC current probe with two ranges, low phase shift at low frequencies and wide dynamic range, for power quality, leakage and earth current measurement.

AC/DC measurement up to 100 A peak (70 A RMS), DC–300 kHz bandwidth, BNC output, for conductors up to 11 mm, and battery or mains adapter operation.

AC/DC measurement up to 70 A peak, DC–1 MHz bandwidth, BNC output, for conductors up to 11 mm, and battery or mains adapter operation.

DC–100 MHz bandwidth, up to 50 A peak, high-frequency current measurement for oscilloscopes and operation via external RP1000P power supply.

AC/DC current probe, DC–10 MHz bandwidth, 150 A RMS, 300 A peak (500 A ≤30 µs), requires RP1000P power supply and is compatible with Rigol oscilloscopes.

AC/DC current clamp with Hall sensor for ±30 A, DC–100 kHz bandwidth, 100 mV/A output, 4 mm banana plug and CAT III rating for multimeters and oscilloscopes.

AC/DC current clamp with Hall sensor for ±100 A/1000 A, DC–20 kHz bandwidth, 10 mV/A or 1 mV/A output and CAT III rating for oscilloscopes.