Megger

Portable appliance tester with Bluetooth, 250/500 V insulation testing, 200 mA continuity testing and built-in NiMH battery charging.

Portable appliance tester with Bluetooth, 250/500 V insulation testing, 200 mA continuity testing and cloud-based reporting via CertSuite PAT.

Compact thermal camera with 256 × 192 IR resolution, temperature measurement from -20 to 550 °C, 5 MP digital camera, and 3.5" touchscreen.

256 × 192 IR resolution, temperature measurement from -20 to 550 °C, 2 MP digital camera, and photo and video recording

120 × 90 IR resolution, temperature measurement from -20 to 550 °C, 2 MP digital camera, and photo and video recording

Acoustic camera supplied with MPAC-V verifier/ultrasound generator and MPAC-TM640 thermal imaging module for combined acoustic and thermal inspection.

Up to 300 A test current, memory for over 2000 values and USB-C transfer; supplied with 5 m Kelvin clamps.

For battery systems up to 28 V DC with a maximum of 300 A and 8.3 kW discharge, designed for extended load capacity in conjunction with TORKEL systems.

System with 16 BVM units for automatic cell and block voltage measurement during capacity testing, featuring daisy-chain architecture and PC or TORKEL connectivity.

Measures low resistances with test current up to 600 A and ripple-free DC; supports the DualGround method, automatic testing, PC connection and built-in thermal printer.

Measures low resistances with test current up to 200 A and ripple-free DC; supports DualGround, automatic testing, PC connection and built-in printer.

Up to 600 A test current with microprocessor-based measurement, data storage and reporting; unit only.

Up to 600 A test current, compact design for switches, joints and cable terminations; unit only.

Single-phase with variable frequency 15–550 Hz and continuous phase angle adjustment for advanced secondary testing.

Single-phase with extended measurement section for impedance, power and phase angle measurement, as well as PC communication.

Single-phase with integrated current and voltage source for secondary testing, measurement of time, current and voltage.

3-phase with three current generators and four voltage generators, up to 105 A or 900 V for manual secondary and primary testing.

1 break/phase, 1 analogue channel; timing of main/resistor contacts, measurement of coil current, station voltage and movement, with DualGround support.

Portable solution for controlled discharge tests with logging, automatic test control and support for servicing stationary battery installations.

Up to 200 A test current, 20 mΩ range and long dwell time; supplied with 5 m test and sensing leads.

Up to 220 A test current, 1 µΩ–1000 mΩ measurement range, Bluetooth communication and DualGround safety; supplied with 1.3 m Kelvin probes.

Insulation testing up to 15 kV for extreme high-voltage diagnostics, measurement range up to 35 TΩ, and advanced PI, DAR, DD and PDC tests.

Insulation testing up to 10 kV for demanding high-voltage environments, measurement range up to 35 TΩ, and advanced PI, DAR, DD and PDC tests.

Insulation testing up to 5 kV for demanding high-voltage environments, measurement range up to 15 TΩ, and advanced PI, DAR, DD and PDC tests.

Programmable insulation testing up to 15 kV for high-voltage diagnostics, measurement range up to 30 TΩ, and PI, DAR, DD and PDC tests with data storage.

Programmable insulation testing up to 10 kV for advanced diagnostics, measurement range up to 20 TΩ, and PI, DAR, DD and PDC tests with data storage.

Programmable insulation testing up to 5 kV for advanced diagnostics, measurement range up to 15 TΩ, and PI, DAR, DD and PDC tests with data storage.

Programmable insulation testing up to 10 kV for high-voltage installations, measurement range up to 20 TΩ, and PI and DAR diagnostics for go/no-go testing.

Programmable insulation testing up to 5 kV for high-voltage installations, measurement range up to 20 TΩ, and PI and DAR diagnostics for go/no-go testing.

50–290 V operating voltage, 10–1000 mA test range, ramp test and automatic test sequence, backlit LCD and IP54-rated housing.

Measures outlet voltage (TRMS), tests RCD types A/AC/F, loop impedance and earth resistance, with touch voltage, harmonics, data storage and app support.

Single-phase ripple-free and continuously variable 24–250 V AC/DC for operational voltage testing of circuit breakers, with separate outputs for operating coils and tension motors.

Single-phase primary test system up to 5000 A AC for testing relay protection, circuit breakers and current transformers, with integrated measurement of time, current and turnover.

For testing Mode 3 charging boxes with Type 2 connection, support for CP/PP simulation and compatibility with MFT1700/1800 for testing in accordance with IEC/EN 61851-1.

Measures insulation, continuity, loop and RCD with TrueLoop technology, support for EV and PV installations, RCD configurator, colour screen and CertSuite connectivity.

With transmitter and receiver for tracing live and dead conductors in walls and ground, identifying fuses, and locating breaks and short circuits.

Battery tester that measures impedance, voltage and temperature of lead-acid, NiCD and lithium-ion cells, and supports discharge testing and data storage via USB and SD.

Static motor diagnostics up to 15 kV with automated tests for insulation resistance, HiPot and surge analysis.

2A test current and data storage, noise reduction with Confidence Meter™, support for long cables, safe inductive testing and USB export in field environments.

Programmable insulation testing up to 2.5 kV for high-voltage installations, measurement range up to 200 GΩ, and PI and DAR analysis in a handheld format.

Checks safety and function of Mode 2 and single-phase Mode 3 chargers with Type 1/2, including CP status, RCD check and four safety tests.

Voltage tester for AC/DC with LCD and LED indication, continuity test with audible/visual alarm, single-pole test, phase rotation, built-in torch, CAT IV 1000 V and IP64.

Up to 2,000 V DC, 1,500 V AC TRMS and 1,500 A AC/DC, with inrush current, min/max, Bluetooth and remote monitoring via app.

Voltage detector for AC 12–1000 V in low and medium voltage modes, 50/60 Hz, with light, sound and vibration indication, LED indicator, CAT IV 1000 V and IP67.

Multifunction motor tester for static testing with insulation, Kelvin measurement, inductance and capacitance, temperature compensation and data storage.

2A test current, noise reduction with Confidence Meter™, Difference Meter for quick comparisons and reliable inductive testing in noisy environments.

Handheld Time Domain Reflectometer (TDR) for fault location on metal cables with 0.1 m resolution, range up to 5 km, auto-select 25–100 Ω and IP54 rating.

2-channel TDR for power cables with 0.1 m resolution, range up to 20 km, automatic impedance matching, selectable VF 0.2–0.99 and CAT IV 600 V protection.

Automatic sequence with 50, 100, 230, 400 and 690 V AC for functional testing of two-pole testers, high output power, magnetic backplate and battery operation.

High-resolution earth resistance and soil resistivity with 4-pole method, automatic frequency, filtering, data storage and colour display.

Leakage current clamp for earth fault detection with true RMS, 6 mA–100 A AC measurement range, low-pass filter for noisy environments and 40 mm jaw opening.

2A test current for low resistances, with support for multiple test modes, robust IP-rated construction for field and operational environments.

50–1000 V test voltage, PI/DAR/VAR functions, Bluetooth connectivity, data storage and CAT IV 600 V safety rating.

50–1000 V test voltage, PI/DAR/VAR functions, data storage, variable test voltage 10–1000 V and IP54 rating.

50–1000 V test voltage, PI/DAR functions, fast continuity testing and CAT IV 600 V safety rating.

250, 500 and 1000 V test voltage, measurement range up to 200 GΩ, fast continuity testing and IP54-rated housing.

AC/DC clamp meter for installation and maintenance with 0–600 A current measurement, 600 V AC/DC, resistance up to 400 Ω, and min/max and peak value functions.