Schlöder SESD 8800-4 ESD Verification Set
For verification of ESD generators in accordance with IEC 61000-4-2 with 2 Ω ESD target, 20 dB attenuator and bandwidth up to 4 GHz for future standard requirements.
ESD - Generators verified according to the standard International Electro technical Commission 61000-4-2.
The measurements of the single pulses take place with a special 2 ohm shunt. For the correct verification of the ESD impulses an oscilloscope with a minimum band width of 1 GHz is necessary.
The ESD verification set SESD 8800-4 works to 4 GHz and is appropriate for the future normative measurements with a band width of 2 GHz (see newest draft standards)
Technical data:
- Structure: In accordance with IEC 61000-4-2 Ed. 2.0; IEC 77B/574/FDIS, distributed on 2008-09-19
- Measurement resistor 2 ohms target: 2,04 Ohm +/- 2,5%
- Attenuator: Weinschel Model 2, 20dB
- Test lead: Low Loss cable 1m with BNC-connector (Oscilloscope side)
- Deviation of the insert attenuation: +/- 0,3 dB until 1 GHz , +/- 1,0 dB until 4 GHz
Measurement with attenuator and cable - Maximum pulse voltage: 30 kV
- Weight: 1,0 kg
Include:
2 Ohm ESD – target (4 GHz), 20 dB attenuator, Koax cable 1m, Calibration certificate (PTB) with data of the S-parameters in the frequency range up to 4 GHz