Meatest

High-resistance decade 10 kΩ–100 GΩ, 0.1–1% accuracy, up to 6 kV operating voltage, RS232/USB/LAN/GPIB control and support for short-circuit current testing.

AC/DC 1050 V/30 A with high load capacity and distortion signals, power/energy, plus options for an oscilloscope up to 400 MHz and an insulation tester up to 1.5 kV.

AC/DC 1050 V/30 A with 10 ppm basic uncertainty, power/energy and process DMM, plus RS232/LAN/USB/GPIB interfaces and support in CALIBER/WinQbase.

Programmable capacitance decade 100 pF–100 µF, 0.25% accuracy at 1 kHz, with ground and floating modes, relay control and RS232/USB/LAN/GPIB interfaces.

High-resistance decade 1 MΩ–12 GΩ with 4 decades, 5 kV operating voltage, RS232 control, battery/mains adapter and relays with high insulation resistance.

Programmable AC/DC resistance load 15 Ω–300 kΩ, 3 kW max, ±0.1% accuracy, CR/CP/CC modes, built-in meter and RS232 and GPIB interfaces.

High-current source for AC/DC up to 120 A with phase and frequency synchronisation, built-in process multimeter and extendable current ranges for other calibrators.

Programmable RTD simulator 16 Ω–400 kΩ with ±30 ppm accuracy, ±0.01 °C temperature simulation and RS232/USB/IEEE488 interfaces.

Programmable RTD simulator 10 Ω–300 kΩ with ±200 ppm accuracy, ±0.1 °C temperature simulation and RS232/USB/IEEE488/Ethernet interfaces.

Programmable resistance and RTD simulator 100 mΩ–20 MΩ with ±200 ppm accuracy, ±0.1 °C temperature simulation and RS232/USB/IEEE488/Ethernet interfaces.

Programmable resistance and RTD simulator 1 Ω–1.2 MΩ, ±30 ppm accuracy, ±0.01 °C Pt simulation and RS232/USB/LAN/GPIB interfaces.

Impedance calibrator for calibrating LCR meters from 20 Hz to 1 MHz with programmable R, L and C standards and automated control.

RF resistance standard for calibrating LCR meters up to 100 MHz, 10 Ω–1 kΩ, low frequency dependence and four-pole BNC connection for direct connection.

Laboratory impedance standards for resistance and capacitance, 10 MΩ–10 GΩ, 0.005% accuracy, low time constant and traceable calibration.

Single- and three-phase for calibration of AC/DC quantities and power quality with calibrated phase up to 1 kHz, plus built-in process multimeter for sensors.

Portable AC/DC calibrator for voltages up to 1000 V and currents up to 20 A, with resistance and thermocouple simulation, and optional support for clamp meters.

Portable precision calibrator for DC voltage, DC current and process signals with high accuracy, thermocouple and RTD simulation, and remote control via multiple interfaces.