Current Clamp AC

Leakage current clamp for single- and three-phase systems, 500 µA–400 A, two sensitivities (1 mV/mA or 1 mV/A) and 115 mm jaw.

AC current clamp with a measuring range of 100 mA to 1,200 A, 1 A AC output via 4 mm male banana plug, 1.5 m cable, protection class IP40 and CAT III 600 V.

AC current clamp for non-intrusive measurement, 0.1–2000 A range, BNC output for DMM and oscilloscope, CAT III 600 V.

Current clamp for high-current measurement, 1–2400 A AC, 30 Hz–5 kHz bandwidth, TRMS, low phase shift and rectangular jaws for cables and busbars.

Current clamp for high-current measurement with three AC ranges up to 2400 A, 30 Hz–1 kHz bandwidth, true RMS, low phase distortion and rectangular jaws for busbars.

AC mini current clamp for confined spaces with a measurement range of 2–150 A, 48–500 Hz bandwidth and current output for multimeters.

AC micro-clamp meter for confined spaces with a measurement range of 1–100 A, 48–500 Hz bandwidth and voltage output for direct reading.

AC mini current clamp for low-current measurement with two ranges 5 mA–10 A and 1–100 A, 48–500 Hz bandwidth and voltage output.

AC mini current clamp for instruments with low AC sensitivity, with a measurement range of 1–150 A, 48–500 Hz bandwidth and DC voltage output.

Current clamp for AC 50 mA–200 A RMS with 10 kHz bandwidth, 1 mA/A output, low phase distortion and cable diameter up to 16 mm.

AC current clamp 50 mA–200 A RMS, bandwidth 48 Hz–10 kHz, 1 mV/A output signal and 1.5 m cable with 4 mm male connectors.

AC current clamp 0.5–240 A AC with conversion 1000/1 A, bandwidth 40 Hz–10 kHz, BNC output with 4 mm female connector.

AC current clamp 0.5–240 A AC with a ratio of 1000:1 A, bandwidth 40 Hz–10 kHz, cable output with 4 mm male connector.

AC current clamp 0.5–240 A AC with output signal 10 mV/A, bandwidth 40 Hz–10 kHz, BNC output with 4 mm female connector.

AC current clamp 0.5–240 A AC with output signal 10 mV/A, bandwidth 40 Hz–10 kHz, cable output with 4 mm male connector.

AC current clamp 0.1–240 A AC with two switchable ranges, bandwidth 40 Hz–10 kHz and cable output with 4 mm male connector.

AC current clamp 10 mA–240 A with two switchable ranges, bandwidth 40 Hz–10 kHz and cable output with 4 mm male connector.

Current clamp for AC 4–600 A with current output 1 mA/A, suitable for measuring instruments with current input, for cable or busbar up to 600 A.

Current clamp for AC 4–600 A with current output 10 mA/A, for direct reading with instruments requiring a higher output signal during current measurement.

Current clamp for AC 4–600 A with DC voltage output 1 mV/A, enabling current measurement with instruments without a current input.

AC current clamp for oscilloscopes with a measurement range up to 1000 A, 5 Hz–100 kHz bandwidth, passive filter for harmonics and BNC output for direct connection.

AC current clamp for use with multimeters, with a measurement range up to 200 A, 1 mA/A output via insulated banana plugs and a frequency range of 40 Hz–10 kHz.

AC current clamp for oscilloscopes and DMM, up to 3000 A, 10 Hz–100 kHz bandwidth, BNC output via adapter for power distribution.

AC current clamp for DMM, 1–400 A, 1 mA/A output, 5 Hz–20 kHz bandwidth, CAT IV 600 V/CAT III 1000 V.

Current transformer for low-current measurement up to 40 A AC, also suitable for 1 A and 5 A secondary currents, with jaw capacity for conductors up to 15 mm.

AC/DC measurement 1–400 A with Hall effect, 1 mV/A output, safety class CAT III 600 V and supplied as a kit with a soft case.

AC current clamp for DMM, 0.1–800 A AC, 1000:1 ratio, 30 Hz–10 kHz bandwidth, CAT III 600 V.

AC current clamp, 0.1–200 A RMS range, 1 mV/A output via 4 mm banana plugs, ±2% accuracy and CAT II 600 V / CAT III 300 V.