Sensepeek

4 PCB holders, large A4 base plate with pre-fitted insulation cover, insulation washers and microfibre cloth for larger circuit boards and parallel test setups.

4 x PCB holders, small A5 base plate with insulation cover, insulation washers and microfibre cloth for a compact workspace when working with smaller circuit boards.

4 x 20 mm PCB holders, XS base plate with insulation cover, insulation washers and rubber feet for low profile in TEM cells and test setups.

4 x 80 mm metal base plates with through-hole mounting, powder-coated finish and rubber feet for freestanding or wall-mounted use.

1 x insulation cover for PCBite Small A5 base plate (210×148 mm), provides extra protection when working with live circuit boards.

1 x 5.0 mm MMCX adapter for SQG60 AC/DC, shortens the ground path and reduces noise during high-frequency measurements up to approximately 3.6 GHz.

1 x 3.5 mm MMCX adapter for SQG15 and SQG30, shortens the ground path and reduces noise during high-frequency measurements up to 1.5–2.6 GHz.

1 x MMCX adapter for PCBite SQ100, SQ200, SQ350 and SQ500, reduces ground length and noise without limiting the probe’s bandwidth.

2 x low-profile PCBite holders, 20 mm, with insulating washers, for low profile in TEM cells and test setups with varying PCB heights.

5 replacement tips for SQG series probes, intended for replacing worn or damaged probe tips.

3 x 3.5 mm ground spring probes for SQG15 and SQG30, for a stable ground connection during oscilloscope measurements.

2 x double ground spring probes, 5.0 mm, for SQG60, providing dual ground connection for hands-free measurements.

2 x 3.5 mm double-ground spring probes for SQG15 and SQG30, providing a double ground connection for hands-free measurements.

DC-coupled passive 10:1 probe, up to 6.0 GHz bandwidth, 333 Ω tip impedance,

AC-coupled passive 10:1 probe, up to 6.0 GHz bandwidth, 333 Ω tip impedance,

DC-coupled passive 10:1 probe, up to 3.0 GHz bandwidth, 500 Ω tip impedance, up to 15 V DC voltage and optimised for 50 Ω input.

AC-coupled passive 10:1 probe, up to 3.0 GHz bandwidth, 500 Ω tip impedance,

DC-coupled passive 10:1 probe, 1.5 GHz bandwidth, 500 Ω tip impedance, up to 16 V DC voltage and optimised for 50 Ω input.

AC-coupled passive 10:1 probe, 1.5 GHz bandwidth, 500 Ω tip impedance,

5 x earthed 3.5 mm probe pins for SQ200, SQ350 and SQ500, enabling measurements over SMD components at full bandwidth without soldering.

2 x SQ350 350 MHz and 4 x SQ10 hands-free probes with A4 base plate, insulation shield and PCB holder for oscilloscope, DMM and logic analysis measurements.

2 x SQ200 200 MHz and 4 x SQ10 hands-free probes with A4 base plate, insulation shield and PCB holder for oscilloscope, DMM and logic analysis measurements.

2 x SQ500 500 MHz hands-free oscilloscope probes with A4 base plate, insulation shield and PCB holder for stable PCBite measurements on circuit boards.

2 x SQ350 350 MHz hands-free oscilloscope probes with A4 base plate, insulation shield and PCB holder for stable PCBite measurements on printed circuit boards.

SQ500 500 MHz hands-free 10:1 oscilloscope probe with probe holder, multiple ground options, cable holder and probe cover for stable PCBite measurements.

SQ350 350 MHz hands-free 10:1 oscilloscope probe with probe holder, multiple ground options, cable holder and probe guard for stable PCBite measurements.

SQ200 200 MHz hands-free 10:1 oscilloscope probe with probe holder, multiple ground options, cable holder and shield for stable PCBite measurements.

2 x PCBite holders with insulating washers for stable mounting of circuit boards on a magnetic base plate.

2 x SQ200 200 MHz hands-free oscilloscope probes with A4 base plate, insulation shield, PCB holders and test leads for stable measurements on printed circuit boards.

4 x SQ10 insulated hands-free probes with test leads, lead holders and spare test tips for stable measurements with a DMM, logic analyzer or oscilloscope.

4 x SQ10 hands-free probes with A4 base plate, insulation covers, PCB holders and test cables for stable oscilloscope measurements on printed circuit boards.

Kit with two SQ10 oscilloscope probes and four PCB holders, base plate, insulation shield, test pins and cables for hands-free PCB measurements.

2 x insulated SQ10 hands-free oscilloscope probes (red/black) with test pins, cable holders and banana-to-Dupont cables for stable PCBite use.

XL A3 base plate (297×420 mm) with pre-fitted insulation shield for safe use with PCBite holders, probes and magnifying glasses.

Insulation shield for large PCBite base plate, providing extra protection when working with live boards and reducing reflection during microscopy work.

Accessory kit containing 16 cable holders, 2 test hooks and 4 short cables for SP10, SP100 and SP200 probes.

Spare parts kit containing 8 insulating washers and 4 base covers for PCBite holders.

2×4 cable harness for IDC 2.54 mm pin header, 0.8 m length, colour-coded for Saleae (4 ground, 4 signal) and compatible with PCBite probes.

4 SP10 probes with test pins, spare pins and Dupont/banana-to-Dupont cables for hands-free measurement with a DMM, logic analyzer or power supply.

2 SP10 probes (red/black) with test pins and banana-to-Dupont cables for direct connection to a multimeter or power supply.

4 PCBite holders, 4 SP10 probes with test pins and an A4 base plate, including test cables and accessories for hands-free measurement on fine-pitch components.

4 PCBite holders, large A4 base plate, insulating washers and microfibre cloth for securing and testing larger or interconnected circuit boards.

4 PCBite holders, small A5 base plate, insulating washers and microfibre cloth for securing and inspecting printed circuit boards.