Systems for testing, measurement and verification of battery cells and battery packs. Includes solutions for development, quality assurance and analysis in laboratory and test environments.
Measures battery voltage and internal resistance with 1 kHz AC stimulation, up to 50 measurements/s, 4-wire Kelvin connection and RS232/USB interface.
2-channel battery simulator and DC power supply, 2×45 W (90 W total), 2-quadrant operation with source/sink, variable 0–1 Ω output impedance and USB/LAN.
1-channel battery simulator and DC power supply, 150 W, 2-quadrant operation with source/sink, variable 0–1 Ω output impedance and USB/LAN.
Tests leakage current and insulation resistance up to 1 kV DC with PD detection, V/I waveform logging, automatic test sequence and USB/Ethernet interface.
High-precision system with ±0.001% FS accuracy, 1 ms transient response, parallel connection up to 1200 A and regenerative AC/DC architecture for cell and LIC testing.
High-precision system with 0.015% FS accuracy,
Regenerative test system for battery modules with up to 60 kW per channel, parallel connection up to 2600 A, 85% energy recovery and CC/CV/CP modes.
Regenerative test system 60–1000 V, up to 300 kW and 750 A, >90% efficiency, 2 ms current response and dynamic NEDC/FUDS/HPPC profile simulation.
Up to 6 kV pulse, 200 MHz sampling, eight test modes, support for BDV mode, as well as LAN/USB/RS232 and multi-channel testing for up to 25 cells.
100–1500 VDC, 7–504 kW, bidirectional operation with energy feedback, CV/CC/CP modes, modular series/parallel configuration, and WLAN and USB control.
Single-channel instrument. Bidirectional DC power supply 0–80 V, ±170 A, 7.5 kW with regenerative operation, CV/CC/CP/CR modes and LAN/RS232/RS485/CAN interfaces.
Battery tester that measures impedance, voltage and temperature of lead-acid, NiCD and lithium-ion cells, and supports discharge testing and data storage via USB and SD.