ETS LAB LAB/SLV E DC Source/Load
100–300 kW, 1000–2000 V, bidirectional with regenerative load, CC/CV/CP/CR modes, seamless source/sink, master/slave to 1.2 MW, LAN/RS-485.
- Output Power: 100kW/150kW/200kW/250kW/300kW
- Output Voltage: 1000V/1500V/2000V
- Output Current: *2 / *3 / *4 (Auto-Rang)
- Soft start: effectively restrain the impulse current when power on
- Seamless transition between source and sink modes
- Current rise time (0% -90%) <5ms
- CC/CV/CP/CR mode available
- Regenerative DC load function
- LAN/RS485 interfaces
- Emergency stop button and indicators on front panel
- TFT-Touch panel operation
- Mod-bus protocol
- Output contactor
- Remote sense
- CE conformity
- Master-Slave interface
The LAB/SLV E series is an IGBT PWM switching DC power supply that has multiple power levels from 100 kW, 150 kW, 200 kW, 250 kW to 300 kW for a single system. Up to 4 individual systems can be connected in parallel to achieve a system of up to 1.2 MW. The SLV E series of DC power supplies has an auto-range output function. The standard models of the SLV E series offer voltages of 1000 V, 1500 V, 2000 V and currents in the ratio x2, x3, x4. For deviating solutions we have the LAB/SLV 1 series.
The LAB/SLV E-Series is a bidirectional DC source/load that not only provides energy, but is also equipped with a regenerative electronic RLC load that enables efficient energy management. Its advanced dual DSP+FPGA design allows the acquisition and storage of measured values at a high frequency of 10,000 measurements per second. By using optical fibre communication as well as extensive monitoring and protection functions, the series ensures maximum reliability and efficiency in critical applications.
Product information
-
Art.no
23084