Fluke

Pitot tube for air flow measurement in ventilation ducts, 12-inch length, intended for use with the Fluke 922.

Manual low-pressure pump for pressure and vacuum testing with vacuum down to −0.85 bar and pressure up to 2 bar, two push-fit ports and fine-adjusted venting.

Mounting kit for hands-free use with strap, universal hanger, magnet and hook mounts for flexible placement of instruments with protective cases.

Slim remote solution for measuring hard-to-reach points with integrated test button, designed for use with Fluke 1500 and 1650 series installation/insulation testers.

Flexible current probe for AC measurement up to 2,500 A with a 25 cm loop, 7.5 mm coil diameter for confined spaces and a 1.8 m connection cable.

Flexible current probe for AC measurement up to 2,500 A with a 45 cm loop, 7.5 mm coil diameter for confined spaces and a 1.8 m connection cable.

Mounting accessory for the ScopeMeter 190 Series II, enabling hands-free operation through secure mounting on panels, cabinets or other fixed objects.

Replacement battery for the ScopeMeter 120 Series and Fluke 43/43B with 4.8 V nominal voltage, 3000 mAh capacity and NiMH technology for longer runtime.

Rechargeable NiMH battery pack 7.2 V / 3,500 mAh for the Fluke ScopeMeter 190, 190C and 430 series, charged directly in the instrument.

PC software for documentation and analysis with USB/IR communication, compatible with selected Fluke instruments and supplied with an IR adapter and USB cable.

Type K thermocouple probe with banana plug for temperature measurement from −40 to 260 °C, designed for multimeters with temperature function.

Test lead for measurement in Schuko mains sockets with colour-coded 4 mm connectors, designed for direct connection to the Fluke 165X series installation testers.

Lithium-ion battery with up to 16 hours of runtime, designed for Fluke 430-II energy analyzers and the Fluke 190-II ScopeMeter series.

Hydraulic pressure test pump for high pressures up to 10,000 psi (690 bar), designed for the Fluke 700G series pressure gauges and 717 calibrators.

Pneumatic pressure test pump for pressures up to 600 psi (40 bar), designed for Fluke 700G series pressure gauges and 71x calibrators.

PC software for 700G series pressure gauges with real-time and remote logging, configurable sampling rate and log length, and upload and export of measurement data.

Zeroing adapter for installation testers that compensates for cable resistance during loop and low-ohm measurements via Schuko plug or 4 mm probes.

PC software for HART communication with mA calibrators, enabling parameter setup, logging of mA and PV values, and export to spreadsheets.

For energy loggers with a measurement range up to 1500 A, 30 cm coil, direct connection without scaling factor and 1.8 m cable for flexible placement.

Flexible AC current probe set for energy loggers, up to 3000 A, 60 cm coil, direct connection without scaling, 1.8 m cable, 3-pack.

Flexible AC current probe set for energy loggers, up to 6000 A, 90 cm coil, direct connection without scaling, 1.8 m cable, 3-pack.

Mounting kit for the Fluke 173x series, enabling secure mounting of loggers and power supplies using magnetic mounts for energy and power measurement.

Flexible AC current probe set for energy loggers, up to 1500 A, 30 cm coil, direct connection without scaling, 1.8 m cable, 3-pack.

Kelvin test probe set for battery analysis with built-in measurement button, designed for impedance measurement and compatible with Fluke 500 series battery analyzers.

Intelligent test probe set for battery analysis with LCD, OK/FAIL LED, voice input for battery ID and trigger, supplied with long and short extensions.

Intelligent test probe set for battery analysis with IR temperature, LCD, OK/FAIL LED, voice input for battery ID and extension for confined spaces.

7.4 V, 3000 mAh lithium-ion battery for powering Fluke BT500 series battery analyzers.

18 V AC battery charger for charging Fluke BT500 series battery analyzers.

Adapter for connecting 4 mm test leads or current clamps to Fluke 500 series battery analyzers, enabling AC/DC measurement with compatible current clamps.

IR module for wireless data transfer to mobile or PC, compatible with Fluke Connect for real-time viewing, logging and sharing.

Current transformer for low-current measurement up to 40 A AC, also suitable for 1 A and 5 A secondary currents, with jaw capacity for conductors up to 15 mm.

3-pack current transformers for low-current measurement up to 40 A AC, also suitable for 1 A and 5 A secondary currents, with jaw capacity for conductors up to 15 mm.

Accessory kit for T5 series electrical testers with SureGrip Slim Reach test leads and a soft carrying case for safe transport and storage.

4-pack flexible current probes for Fluke 17XX loggers, up to 6000 A AC, 90 cm loop and direct connection without scaling.

4-pack flexible current probes for Fluke 17XX loggers, up to 3000 A AC, 60 cm loop and direct connection without scaling.

IR telephoto lens for thermal imagers, 4× magnification for long-distance measurement, quick mounting without recalibration, for RSE300 and RSE600.

Articulated camera probe for videoscopes with a 5.5 mm diameter, 0.7 m length, 180° articulation and HD resolution of 1280×720 for inspection in confined spaces.

Videoscope probe with dual-view camera for the DS703 FC, 5.5 mm diameter and 1 m length, designed for industrial, transport and manufacturing inspections.

IR telephoto lens with 2× optical magnification for thermographic measurements at longer distances, compatible with TiX580, TiX501, Ti480 PRO and Ti401 PRO.

27 Hz thermal imager with 384×288 IR resolution, −20 to 550 °C range, video recording, data streaming and inventory QR flow for efficient inspection logging.

Automatically logs harmonics, voltage, current and power. Energy Analyze Plus included. For troubleshooting and analysis in three-phase systems.