Fluke

384 × 288 IR resolution, UltraFocus, temperature measurement from −20 °C to 650 °C, 4× digital zoom, and 13 MP digital camera

640 × 480 IR resolution, UltraFocus, temperature measurement from −20 °C to 1200 °C, 10× digital zoom, and 13 MP digital camera

640 × 480 IR resolution, SuperResolution up to 1280 × 960, UltraFocus, temperature measurement up to 1200 °C, and 10× digital zoom

Acoustic camera for leak detection, partial discharge inspection and mechanical inspection with a 2–100 kHz frequency range, LeakQ™, PDQ™ and MecQ™.

Instruments for acoustic imaging and non-contact localization of sound sources. Used to detect compressed air and gas leaks, partial discharge and mechanical faults in industrial, energy and maintenance applications.

Insulation testing up to 2.5 kV for industrial and solar cell applications, measurement range up to 500 GΩ, and automatic PI and DAR calculations.

100G pressure measurement and generation −850 mbar to 7 bar with built-in pump, 0.05% FS accuracy, mA measurement and 24 V loop supply.

10,000G pressure measurement 0–690 bar with internal sensor, 0.05% full-scale accuracy, simultaneous mA measurement and 24 V loop power supply for p/I calibration.

60 Hz with 640×480 resolution, 240° rotatable screen, LaserSharp and MultiSharp focus, SuperResolution and support for Fluke Connect SmartView analysis.

60 Hz IR camera with 640×480 resolution, MultiSharp focus, SuperResolution, improved thermal sensitivity and Fluke Connect.

60 Hz fixed-mount with 320×240 resolution, radiometric data streaming, SmartView support and MATLAB/LabVIEW integration for continuous measurement and analysis.

9 Hz fixed-mount with 640×480 resolution, radiometric data streaming, SmartView support and MATLAB/LabVIEW integration for continuous measurement and analysis.

Complies with IEC 61000-4-30 Class A ver. 3. Transient recording up to 20 MHz. Advanced analysis via Energy Analyze Plus.

With 1 MHz sampling rate for transient analysis. Records power quality data and harmonics. Energy Analyze Plus software included.

Automatically logs harmonics, voltage, current and power. Energy Analyze Plus included. For troubleshooting and analysis in three-phase systems.

27 Hz thermal imager with 384×288 IR resolution, −20 to 550 °C range, video recording, data streaming and inventory QR flow for efficient inspection logging.

AC/DC clamp meter for installation and service, 600 A range, 0.01 A resolution, voltage, resistance and frequency measurement, with 10 mm jaw.

AC clamp meter for electrical maintenance with a measurement range up to 400 A AC, compact 30 mm jaw and safety rating CAT IV 300 V/CAT III 600 V.

Compact digital multimeter for AC/DC voltage up to 600 V and current up to 10 A, resistance, capacitance, continuity and diode testing, CAT III 600 V.

TRMS multimeter for AC/DC voltage up to 1000 V and current up to 10 A, resistance, capacitance, frequency and temperature measurement, CAT III 600 V.

TRMS multimeter for AC/DC voltage up to 1000 V and current up to 10 A, resistance, capacitance and diode testing, with backlit display and CAT III 600 V.

Includes FEV300 adapter for extended testing of AC charging stations, with advanced features, FC communication and support for TruTest documentation.

Includes FEV300 adapter for testing AC charging stations, with FC communication and all standard measurements for installation testing in accordance with IEC 60364.

Earth fault locator for solar power systems with non-contact signal tracking, transmitter, receiver and signal clamp, rated CAT III 1,500 V DC/CAT IV 600 V.

I-V curve tracing up to 1,500 V DC and 30 A for high-efficiency modules, 100/500 measurement points, 9 s sweep delay and wireless Wi-Fi communication.

I-V curve tracing up to 1,500 V DC and 30 A with 100/500 data points, generates I-V/P-V curves and Isc/Voc/Imp/Vmp/Pmax, plus wireless Wi-Fi communication.

Automatic pressure calibration to 7 MPa with internal pump, interchangeable modules, built-in test templates, HART communication and documentation.

Wireless AC/DC current clamp for high-voltage installations with true RMS, measurement range up to 60 A, slim jaw for confined spaces and use with the Fluke 283 FC.

TRMS multimeter for AC/DC voltage up to 1,500 V DC/1,000 V AC, limit meter, internal memory and Fluke Connect support, CAT III 1,500 V/CAT IV 1,000 V.

Includes TruTest software for reporting and data management, with advanced test functions, automatic measurement sequences and full FC communication.

Advanced tester with FC communication, dual insulation levels and differential RCD testing for professional installation checks.

Includes TruTest software and FC communication with automatic RCD testing for rapid verification of electrical installation safety.

Installation tester with wireless FC communication for measuring continuity, insulation resistance, voltage, RCDs and loop impedance according to IEC 60364.

Includes TruTest software for documentation and reporting, with automated testing of electrical installations according to IEC 60364.

Tester for the safety of electrical installations, measuring continuity, insulation resistance, voltage, polarity, and loop and line impedance.

Fluke TY2 Zero Adapter

Includes TruTest software for documentation and testing of AC charging stations with Type 2 interfaces, CP/PP measurement, RCD testing and waveform analysis.

Analyzer for testing AC charging stations with Type 2 interfaces, CP/PP measurement, RCD testing, waveform analysis and Bluetooth connectivity

4-channel, 500 MHz bandwidth, up to 5 GS/s, 10,000 points per channel and CAT III 1000 V/CAT IV 600 V.

2-channel with DMM. 500 MHz bandwidth, up to 5 GS/s, 10,000 points per channel and CAT III 1000 V/CAT IV 600 V.

2-channel with DMM and SCC293 kit. 200 MHz bandwidth, 2.5 GS/s per channel, 10,000 points per channel and CAT III 1000 V/CAT IV 600 V.

2-channel with DMM and SCC293 kit. 100 MHz bandwidth, 1.25 GS/s per channel, 10,000 points per channel and CAT III 1000 V/CAT IV 600 V.

Test kit containing the Fluke T5-600 electrical tester, Fluke 62 MAX+ IR thermometer and Fluke 1AC II VoltAlert voltage detector for troubleshooting and inspection.

Premium model for insulation, continuity, loop and RCD, with insulation pre-test, automatic test sequence, earth resistance and wireless data incl. FEV300 adapter.

Tests AC charging stations in Mode 3 with Type 2, simulating vehicle, cable and CP/PP, with earth fault testing and IEC/EN 61851-1 compliance.

IR telephoto lens with 2× optical magnification for thermographic measurements at longer distances, compatible with TiX580, TiX501, Ti480 PRO and Ti401 PRO.

Videoscope probe with dual-view camera for the DS703 FC, 5.5 mm diameter and 1 m length, designed for industrial, transport and manufacturing inspections.

Articulated camera probe for videoscopes with a 5.5 mm diameter, 0.7 m length, 180° articulation and HD resolution of 1280×720 for inspection in confined spaces.

Solar cell tester with I-V curve tracing, IEC/EN 62446-1 testing, up to 1000 V DC and wireless IRR2-BT communication with software support.

Solar panel tester with I-V curve tracing, IEC/EN 62446-1 testing, up to 1000 V DC and wireless IRR2-BT connectivity.

Premium model with insulation, continuity, loop and RCD testing, insulation pre-test, automatic test sequence, earth resistance and wireless data sharing.

Test lead set for solar PV measurement with PV MC4 to current clamp, CAT III 1000 V/CAT IV 600 V rating, 20 A current rating and adapted for 4 mm banana plugs.

Test lead set for solar installations with MC4 to 4 mm banana plugs, CAT III 1000 V/CAT IV 600 V rating and current capacity up to 20 A.

IR telephoto lens for thermal imagers, 4× magnification for long-distance measurement, quick mounting without recalibration, for RSE300 and RSE600.

TRMS AC/DC clamp meter for measurements up to 1500 V DC and 1000 V AC, 999.9 A via clamp, 2500 A via iFlex; IP54-rated with logging via Fluke Connect.

Solar radiation meter for measuring W/m² in accordance with IEC 62446-1, with ambient and PV module temperature measurement, as well as a compass and tilt function.

AC/DC clamp meter for installation and analysis with true RMS, FieldSense technology for non-contact voltage and current measurement, and iFlex probe for up to 2500 A AC.

AC/DC clamp meter for installation and industrial use with TRMS, FieldSense for non-contact voltage and current, and iFlex support up to 2500 A AC.

Tester with FieldSense and Visual Continuity technology for non-contact measurement of AC voltage, current and frequency up to 1000 V and 200 A.

IR resolution 320×240, −20 to +400 °C, IR-Fusion® with picture-in-picture, 3.5″ LCD, IR-PhotoNotes™ and Fluke Connect®.