Start | Sortiment | Kraftelektronik | Power Supplies | Programmerbara Aggregat | Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)
Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)
Bilder
  • Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)
  • Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)
  • Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)
  • Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)
  • Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)

Rohde & Schwarz HMC8043 Kraftaggregat 3-kanaler 0-32V, 100W (33W/kanal, 3 A max)

Art. nr: 70885
17 085 kr
 
Antal
 
 
 

Produktbeskrivning

  • 3 Channel 
  • Power 100W (33W/Channel, 3A (max.))
 
Power supply units in industrial production environments are often found in 19” racks. The R&S®HMC804x series instruments are very suitable for this use as all models can be integrated into 19” racks with the rack mounting kits R&S®HZC95.
Two R&S®HMC8043 models built side by side result in 6 channels on 2 rack units. Please ensure sufficient space is available in the rack for adequate cooling (required minimum space above a R&S®HMC804x: 1 rack unit).
Additionally, all front panel connectors plus SENSE lines are located at the back panel of the instrument. In order to facilitate the regular fitting-out for calibration the rear panel connector was designed with a WAGO cage clamp.
 
Clear display of all measured parameters
  • Brilliant QVGA color display (320 x 240 pixel)
  • Realtime voltage, current and power values
  • High setting and readback resolution: 1mV and 0.1mA/1.0mA (depending on current and model)
  • Low residual ripple due to linear post regulation
  • High energy efficiency, low heat dissipation and quiet fan
 
Galvanically isolated, floating and short-circuit-proof outputs
  • Front panel: 4mm (0.16in) safety sockets (R&S®HMC8041 including SENSE)
  • Rear panel: WAGO cage clamp for all channels including SENSE
  • Convenient parallel and serial operation via V/I tracking
 
Protective functions adjustable for each channel
  • Overvoltage protection (OVP) for all outputs
  • Overpower protection (OPP) for all outputs
  • FuseLink (freely combinable electronic fuses)
  • FuseDelay (fuse activation delay)
 
Ideal power supply for hardware developers and labs
  • EasyArb function for user-definable V/I curves
  • EasyRamp for simulating a start-up curve (directly programmable on device)
  • Sequencing (sequenced start of channels)
  • Energy meter (measurement of energy output)
  • Analog input for external control via voltage (0 V to 10 V) or current (4 mA to 20mA)
  • Trigger input for starting/controlling EasyArb
  • Data logging to USB flash drive in CSV format
 
Remote control
  • USB interface (CDC/virtual COM port, TMC)
  • LAN interface, LXI-compliant
  • Optional GPIB interface
  • Remote control via SCPI-based commands
 
 

Relaterade

Rohde & Schwarz HZC95 19
70886
Rohde & Schwarz HZC95 19" rackmount kit, 2HU, for one or two R&S®NGE and HMC series (accessory)
Power supply units in industrial production environments are...