Start | Sortiment | Kraftelektronik | Laboratorieaggregat | Programmerbara aggregat | TTi QL564P Precisionsaggregat med 1 utgång, GPIB, RS232 & USB interface och terminaler på baksidan med områden 56V/2A eller 25V/4A, 112W
TTi QL564P Precisionsaggregat med 1 utgång, GPIB, RS232 & USB interface och terminaler på baksidan med områden 56V/2A eller 25V/4A, 112W
Bilder
  • TTi QL564P Precisionsaggregat med 1 utgång, GPIB, RS232 & USB interface och terminaler på baksidan med områden 56V/2A eller 25V/4A, 112W

TTi QL564P Precisionsaggregat med 1 utgång, GPIB, RS232 & USB interface och terminaler på baksidan med områden 56V/2A eller 25V/4A, 112W

Art. nr: 70709
7 100 kr
 
Antal
 
 
 

Produktbeskrivning

The QL series represents the 'next generation' of laboratory power supplies offering an unparalleled level of precision and performance.

 

Voltage and current are controlled using 16 bit DACs enabling voltages to be set to 1mV resolution even at full output. Indeed, the accuracy is sufficient for the PSU to be used as a calibration source for some hand-held DMMs.

 

The QL series uses pure linear technology and offers unrivalled performance in terms of regulation, output noise and dynamics.

Line and load regulation are at the limit of measurement. Output noise is less than 350µV rms. Recovery time from transient current pulses is better than 50µs.

 

The QL series provides full remote sense capability via dedicated sense terminals. Remote sense is essential to maintain precise regulation at the load (two 0·03 Ohm connection leads will drop 300mV at 5 Amps).

When remote sense is not required, internal local sensing can be selected at the touch of a button.

 

QL564P has GPIB, RS232 & USB interfaces and rear terminals.

 

Mer information

OBS! Bilden visar både 1-kanals och 3-kanals modellerna.

 

Se databladet för tekniska data och övrig information.