The PL303QMT-P has identical features to the PL303QMD-P but has a full performance third output with a low voltage, high current capability.
This third output can provide 0 to 6V to a resolution of 1mV, at currents up to 8A. All of the features of the main outputs are incorporated including S-Lock, V-Span, selectable remote sensing, and a low-current range with 0.1mA resolution.
The Both-On/Both-Off control of the dual is replaced by an All-On/All-Off function.
The size is 3/4 rack, so that one triple plus one single could be accommodated within a standard rack width.
The New PL Series is the latest high-performance linear regulated dc power supply range from TTi.
The New PL Series retains the true analog control of the original PL series, but combines it with new digitally based convenience features, higher power density, and superior performance
The PL303QMT has four modes of operation - Independent, Isolated Tracking, Isolated Ratio Tracking, and True Parallel.
Independent: The two outputs are completely independent and electrically isolated from each other.
Tracking: The two outputs remain electrically isolated, but the voltage control of the Master output sets an identical voltage on the Slave output.
Ratio Tracking: As Tracking, but the Slave voltage can be set to to any percentage of the Master output and will retain that percentage ratio as the Master voltage is varied.
Parallel: All of the power (up to 180 watts) is channelled to the Master output which can consequently supply up to 6 amps. The Slave output is turned off and its meters are blanked.
Display Type: Dual 4-digit meters, 10mm (039) LED.
Voltage Meter Resolution: 10mV; Accuracy: (01% of reading + 10mV)
Current Meter Resolution: 1mA (0,1mA on 500mA range); Accuracy: (03% + 0005A) to 3A; (05% + 0005A) to 5A; (03% + 05mA) on 500mA range
Cooling: Intelligent variable-speed low noise fan assists convection.
Safety: Complies with EN61010-1
EMC: Complies with EN61326
Size: 214mm wide x 131mm high ( rack 3U) x 288mm deep, excluding feet, knobs and terminals.