Start | Sortiment | Kraftelektronik | Laboratorieaggregat | Manuellt styrda aggregat | TTi MX100T 3 kanaler 35V/3A, 105W/kanal, max 70V/6A
TTi MX100T 3 kanaler 35V/3A, 105W/kanal, max 70V/6ATTi MX100T 3 kanaler 35V/3A, 105W/kanal, max 70V/6A
  • TTi MX100T 3 kanaler 35V/3A, 105W/kanal, max 70V/6A
  • TTi MX100T 3 kanaler 35V/3A, 105W/kanal, max 70V/6A

TTi MX100T 3 kanaler 35V/3A, 105W/kanal, max 70V/6A

Art. nr: TTi MX100T
8 830 kr


Den nya generationen av kompakta DC aggregatet från TTi har 3 identiska utgångar där varje utgång individuellt kan ställas in mellan 0 till 35V och 0 till 3A.


Genom områdesväxling kan man få ut upp till 6 A eller upp till 70V och få ett gemensamt effektläge på hela 210 Watt från en enda utgång.


Avancerade funktioner som t.ex. minne för 200 inställningar, sekventiell av/på switching och lösenordskydd.


A 315 watt precision laboratory power supply offering three full performance outputs each with multiple ranges.

  • Three high performance outputs of 105 watts each
  • 3 x (0 to 35V at 0 to 3A)
  • Total power of 315 watts in a highly compact package
  • Range switching gives up to 70 volts and up to 6 amps
  • Twelve range combinations for maximum flexibility
  • Up to 210 watts from a single output
  • Low output noise and ripple via linear final regulation
  • High setting resolution of 1mV and 0.1mA (output 1)
  • Variable OVP and OCP trips on all outputs
  • 50 setting memories per output + 50 linked memories
  • Selectable voltage tracking (isolated tracking)
  • Selectable current meter averaging
  • Switchable remote sense on all outputs
  • Graphic LCD provides simultaneous output metering
  • Numeric or spin-wheel control of all parameters
  • Individual or combined output on/off control with
  • programmable delay sequencing.
  • Front panel locking with optional pass-code protection
  • 3U half-rack case for bench or rack mounting

>>Läs mer om detta aggregat via denna länk!


Mer information

Unlike other triple output power supplies, all three outputs have a similar power capability and can each provide 0 to 35 volts at 0 to 3 amps.

Range switching extends the capabilities so that outputs can be set to 16V/6A or 70V/1.5A for maximum versatility.


Where higher power is needed from one output, internal switching circuitry enables up to 210 watts to be provided from a single output arranged as either 35V/6A or 70V/3A.


All outputs are fully isolated and independent but voltage tracking can be selected to make two or even three outputs track a single voltage control.

The isolated tracking capability is useful for creating tracking voltages to different ground points, tracking voltages of opposite polarity, or series and parallel connection of outputs.


The MX100T has a large backlit graphic LCD that can show full settings for all three outputs simultaneously. Soft key control provides a fast and intuitive user interface that includes other display modes and menu screens when required.


Voltages and currents can be set by direct numeric entry or in quasi-analog mode using the large spin wheel. Each output has switchable remote sensing and variable over-voltage and over-current protection trips.


200 settings memories are provided arranged as 50 for each output and a further 50 that store the settings for all three outputs simultaneously.


Each output has its own DC On/Off control key but additional keys are provided that turn any combination of outputs on or off simultaneously. This function can be extended to turn the outputs on or off in a timed sequence.


The front panel can be locked against accidental operation by the Lock key. If further security is required locking can be done using a four digit pass code.


The MX100T is housed in a compact case suitable for benchtop or rack mounting (half rack width by 3U height). A rack mount for one or two units is available. Front input ventilation is used to enable horizontal and vertical stacking without compromising cooling.