Start | Sortiment | Kraftelektronik | DC-Aggregat | ETS LAB/HP High Power = compact design 3-63kW up to 1.4MW
ETS LAB/HP High Power = compact design 3-63kW up to 1.4MW
Bilder
  • ETS LAB/HP High Power = compact design 3-63kW up to 1.4MW

ETS LAB/HP High Power = compact design 3-63kW up to 1.4MW

Art. nr: ETS LAB/HP

Begär offert

 
 

Produktbeskrivning

The DC sources of the LAB/HP series are characterized by a high power density of up to 21 kW in 3 U. The sources are controlled by a microcontroller which generates the parameters for the analog control.

The professional version includes a comprehensive set of additional features which facilitate both daily work and adapting the source to the customer application.

The maximum power available in 19" cabinets is 1.4 MW.

Using multiple sources in conjunction with each other does not negatively impact the tolerances nor the speed of the sources. 

This is achieved through the modular internal design of the sources.

 

Mer information

TECHNICAL DATA:
  • 3kW to 1.4MW
  • Output voltage up to 1500V (2000V)
  • Output current up to 2250A
  • Standard input voltages DC&AC also according to customer requirements
  • 21kW in 3U

FEATURES:
The LAB/HP series has the following features, further features can be found in detail in the datasheet

  • Generation of any voltage and current curves via USB stick or digital interface (sequential control)
  • Data log function: Current operating values are stored on a USB stick at an adjustable interval.
  • Available digital interfaces IEEE488, RS485, RS232, LAN and USB
  • ATI 5/10 analog interface galvanically isolated: 0V to 5V or 0V to 10V (user selectable) and soft interlock
  • Adjustable filter function for the analog interface
  • Available modes: UI, UIR, UIP and PVSim
  • Adjustable voltage and current rise time (U- and I-Slope)
  • Umax and Imax adjustable by the user to limit output voltage or current
  • Adjustable switch-off time for the device after pressing the start button
  • Storable U / I output characteristic (e.g. for PVsim, shading) on USB stick
  • "High Speed" rise and fall time of the DC output voltage is reduced by a factor of 10 on average compared to standard times
  • Modular design for increased performance: Master-Slave operation up to 504kW
  • Temperature controlled fan
  • Display via TFT touch display (values, status display and mode selection)
  • Via function USB stick Function generator with different curves
  • auto ranging function
  • Controllable via WLAN
  • Support SCPI command language
  • Protective functions: OVP, OCP, UVP (adjustable time)
  • LabView driver available
  • Control software for Windows
  • External sense outputs
  • Fast crossover between CV & CC
  • Modifiable according to customer requirements, outputs up to 1.4MW possible

APPLICATIONS:
  • Independent stand-alone test station realizable via script control in connection with the data log function
  • Manual testing of varistors
  • Simulation of solar modules simulate
  • Testing of photovoltaic components e.g. inverters or battery charge controllers
  • Simulation and investigation of engine starting gears (car starting curve)
  • Testing of automotive electronics and aircraft applications
  • Charging  of fuel cells
  • Energy storage technology
  • Testing of semiconductors
  • Testing DC/DC converters