0
Varukorgen är tom
Varukorgen är tom (0 artiklar)
Artiklar Frakt Totalt
0 kr 180 kr 0 kr
 
Start | Sortiment | Kraftelektronik | AC-aggregat | ET-Instrumente EAQ 1-fas AC källor för simulering av nätspänning från DC till 2kHz
ET-Instrumente EAQ 1-fas AC källor för simulering av nätspänning från DC till 2kHzET-Instrumente EAQ 1-fas AC källor för simulering av nätspänning från DC till 2kHzET-Instrumente EAQ 1-fas AC källor för simulering av nätspänning från DC till 2kHz
  • ET-Instrumente EAQ 1-fas AC källor för simulering av nätspänning från DC till 2kHz
  • ET-Instrumente EAQ 1-fas AC källor för simulering av nätspänning från DC till 2kHz
  • ET-Instrumente EAQ 1-fas AC källor för simulering av nätspänning från DC till 2kHz

ET-Instrumente EAQ 1-fas AC källor för simulering av nätspänning från DC till 2kHz

Art. nr: ET-Instrumente EAQ 1-phase

Begär offert

 
 

Produktbeskrivning

1-fas AC-källor serie EAQ

 

För komplett simulering av nätspänning av från DC till 2000 Hz.

  •  CV- and CC-Mode !
  • AC Voltage 0..300 Vrms (500V)
  • DC Voltage 0..425 Vdc (700V)
  • Frequency DC, 1 - 500 Hz (2000 Hz)
  • Phase-triggered-switch on-and off
  • External Oscillator input
  • USB, Option RS 232- and Ethernet Interface
  • Measurement Vrms V, Crms A, Cpeak A, Power W, Frequency Hz

 

 

 

Mer information

The highly precise electronic AC source meets all your demands.

The simulation of all technical lines as well as the measurement of the line characteristics is its strength.

The high efficiency of the electronic AC source.

 

EAQ-M lies in the convincing technical data and the easy handling.

Besides the CV- and CC-modes, there is power up to 1000VA, voltages up to 500 VAC and frequencies up to 2000Hz available.

 

The electronic AC sources of the series EAQ have been developed for the simulation and analysis of one- phase line voltage.

In standard sine wave voltage as well as DC voltage and DC voltage with superposed AC-voltage can be produced.

Because of this extensive function outfit, these models can produce all possible technical networks.

 

They fit very well for supplying and testing power supplies, transformers, motors, lamps, heaters, domestic appliances etc., just to name a few.

For the measurement of the effective voltage, the frequency, the effective current, the peak current as well as for the power, there is a LCD display. The manual operation is performed through a potentiometer. DC voltage, AC voltage, frequency and current can be regulated.

 

The new LCD-Display offers the total overview of all adjustments and measurements.

Continuously the adjusted values of AC-Voltage, DC-Voltage, Current, Frequency and Phase-Angle for switching the output on and off, are displayed.

 

In the range of the measurements the true RMS value of the Voltage, the true RMS value of the Current, the Peak-Current, the Real Power, the Apparent Power and the Power Factor are continuously displayed and refreshed.

Not only the new display makes the AC-Source easier to operate, also the new operation features make it real simple to use the AC-Source Type EAQ.

By pressing a button the fixed frequency can beselected between 50, 60 and 400 Hz and also variable frequency is available. To change between standard sine wave output and user curve it is only a button to press.

The last adjustments before switching the unit off at the main switch will be saved and are available by pressing the button POL (PowerOnLast) after switching the unit on again.

 

The output voltage, the DC-Voltage, the Current, the Frequency and the Phase Angle is adjusted on a potentiometer.

To switch the potentiometer between the different parameters it just has to be pressed.

 

From now on the Electronic AC -Source comes with Arbitrary Function.

By simply switching via interface a change between sine wave and variable user curve is possible.

The user memory can be set with up to 1024 dots for the user curve.

Now very easy voltage spikes, drop outs, often in reality existing cut off crest voltage and much more can be simulated.

 

The wave form is transferred via the USB or optional available RS232- or Ethernet Interface and then selected by sending a command or pressing a button.

With this feature the electronic AC-Source can also be used as an arbitrary function generator with high power and high voltage of up to 425 V.