Schlöder SESD 216 ESD simulator 16,5 kV som uppfyller IEC / EN 61000-4-2 standarden

The ESD Simulator SESD 216 is suitable for performing EMC tests on systems in accordance with the standard IEC / EN 61000-4-2 (ESD test). Depending on the test object and test setup, two test methods are to be used: Air discharge and Contact discharge. In the air discharge the pulse is triggered by approaching the SESD 216 towards the DUT. With the method of contact discharge the probe of the generator is placed directly on the test object.

Important: In the case of non-contacting (e.g. painted or oxidized surface), the impulses are not triggered. The display shows "No contact". This ensures that when triggering a discharge actually takes place The contact discharge is the favourite test method since it is most reproducible. Air discharges are used when contact discharges are not possible e.g. at plastic housings.

Key Facts

• 2 test methods are to be used: Air discharge and Contact discharge
• Higher test levels can be set beyond the standard limits.
• Displaying of the real discharge voltage at air mode
• Programmable automatic test runs
• Large display with easy to read digits
• Battery and mains operation