- 1 Channel
- Power 100W (10A (max.))
Power supply units in industrial production environments are often found in 19” racks. The R&S®HMC804x series instruments are very suitable for this use as all models can be integrated into 19” racks with the rack mounting kits R&S®HZC95.
Two R&S®HMC8043 models built side by side result in 6 channels on 2 rack units. Please ensure sufficient space is available in the rack for adequate cooling (required minimum space above a R&S®HMC804x: 1 rack unit).
Additionally, all front panel connectors plus SENSE lines are located at the back panel of the instrument. In order to facilitate the regular fitting-out for calibration the rear panel connector was designed with a WAGO cage clamp.
Clear display of all measured parameters
- Brilliant QVGA color display (320 x 240 pixel)
- Realtime voltage, current and power values
- High setting and readback resolution: 1mV and 0.1mA/1.0mA (depending on current and model)
- Low residual ripple due to linear post regulation
- High energy efficiency, low heat dissipation and quiet fan
Galvanically isolated, floating and short-circuit-proof outputs
- Front panel: 4mm (0.16in) safety sockets (R&S®HMC8041 including SENSE)
- Rear panel: WAGO cage clamp for all channels including SENSE
- Convenient parallel and serial operation via V/I tracking
Protective functions adjustable for each channel
- Overvoltage protection (OVP) for all outputs
- Overpower protection (OPP) for all outputs
- FuseLink (freely combinable electronic fuses)
- FuseDelay (fuse activation delay)
Ideal power supply for hardware developers and labs
- EasyArb function for user-definable V/I curves
- EasyRamp for simulating a start-up curve (directly programmable on device)
- Sequencing (sequenced start of channels)
- Energy meter (measurement of energy output)
- Analog input for external control via voltage (0 V to 10 V) or current (4 mA to 20mA)
- Trigger input for starting/controlling EasyArb
- Data logging to USB flash drive in CSV format
Remote control
- USB interface (CDC/virtual COM port, TMC)
- LAN interface, LXI-compliant
- Optional GPIB interface
- Remote control via SCPI-based commands
