Start | Sortiment | Bänkinstrument | Effektmätare | Rohde & Schwarz HMC8015 Effektanalysator, 50 μW till 12 kW, DC to 100 kHz och hög upplösning
Rohde & Schwarz HMC8015 Effektanalysator, 50 μW till 12 kW, DC to 100 kHz och hög upplösningRohde & Schwarz HMC8015 Effektanalysator, 50 μW till 12 kW, DC to 100 kHz och hög upplösningRohde & Schwarz HMC8015 Effektanalysator, 50 μW till 12 kW, DC to 100 kHz och hög upplösningRohde & Schwarz HMC8015 Effektanalysator, 50 μW till 12 kW, DC to 100 kHz och hög upplösning
  • Rohde & Schwarz HMC8015 Effektanalysator, 50 μW till 12 kW, DC to 100 kHz och hög upplösning
  • Rohde & Schwarz HMC8015 Effektanalysator, 50 μW till 12 kW, DC to 100 kHz och hög upplösning
  • Rohde & Schwarz HMC8015 Effektanalysator, 50 μW till 12 kW, DC to 100 kHz och hög upplösning
  • Rohde & Schwarz HMC8015 Effektanalysator, 50 μW till 12 kW, DC to 100 kHz och hög upplösning

Rohde & Schwarz HMC8015 Effektanalysator, 50 μW till 12 kW, DC to 100 kHz och hög upplösning

Art. nr: 71656

Begär offert

 
 

Produktbeskrivning

  • Power measurement range: 50 μW to 12 kW
  • Analog bandwidth: DC to 100 kHz
  • Sampling rate: 500 ksample/s
  • 16‑bit resolution for current and voltage
  • Basic accuracy: 0.05 %
  • 26 different measurement and mathematical functions

The R&S®HMC8015 power analyzer is the first compact tester for AC/DC load and standby current characterization that enables measurements without additional tools such as a computer or remote infrastructure.

 

In addition to a numerical and graphical display with 26 key parameters, the instrument delivers performance and compliance protocols in line with IEC 62301, EN 50564 and EN 61000-3-2. 

 

Clear display of all measured parameters

  • Brilliant QVGA color display (320 x 240 pixel)
  • Simultaneous display of up to 10 numerical measurement functions
  • User‑configurable measurement display
  • Graphical display modes for inrush, harmonic analysis, waveform and trend chart

 

Measurement accuracy

  • Basic accuracy: 0.05 %
  • Signal acquisition from DC to 100 kHz at a sampling rate of 500 ksample/s
  • Simultaneous display of current and voltage, each with 16‑bit resolution
  • Three‑stage filter system adaptable to the measurement task at hand
  • Long-term data logging in CSV format via USB flash drive

 

Everyday measurement functions

  • Genuine consumption meter thanks to hardware‑based integrator
  • 26 different measurement and mathematical functions
  • Limit testing with PASS/FAIL indication for up to six limits selectable from 14 measurands (e.g. U, I, P, S, Q, F)

 

Ports and extensibility

  • Front panel: 4 mm safety connectors
  • Rear panel: 4 BNC ports for analog and digital inputs and outputs
  • Additional sensor input for current probe or shunt
  • USB port (virtual COM port, TMC)
  • Ethernet port (LXI) with integrated web server
  • IEEE-488 (GPIB) port (R&S®HMC8015-G)
  • Compliance test for key standby and harmonic standards
  • Remote control via SCPI-based commands
  • Driver packages for LabVIEW, LabWindows/CVI, VXI, IVI.net
 

Mer information

Basic Specifications
Analog bandwidth:   DC to 100 kHz
Frequency accuracy:   0.1 % of reading
A/D converter resolution: voltage and current 16 bit
Basic accuracy: 0.05 % of reading
Display resolution:   5 digits, 10 updates/s
Sampling frequency:   500 kHz
Input impedance:   2 MΩ
PLL synchronization sources:   U, I, external
Analog signal filter:   1 kHz
Digital filter: depends on measurement frequency 

 

Additional inputs/outputs:   BNC, rear panel
Analog input:   ±10 V (U peak)
Analog input accuracy:   0.5 % of reading
Analog output:   ±5 V (U peak)

 

Digital input
Limits (PASS/FAIL) bandwidth 100 kHz
PWM 1 kHz
state ≤ 10 Hz
Signal threshold logical zero 0 V to 2 V
logical one 3 V to 24 V
Digital output up to 100 mA source/sink 5 V, TTL
Display:   8.9 cm (3.5") TFT (color) resolution 320 × 240 pixel (QVGA)
Network connection: AC 100 V to 115 V/230 V at 50 Hz to 60 Hz
Power consumption:   max. 35 W, typ. 15 W
Standards:   CAN/CSA-C22.2 NO. 61010-1, UL 61010-1,
DIN EN 61010-1, DIN EN 61326-1, DIN EN 55011
Common mode voltage:   CAT II, 600 V (U RMS)
Dimensions:   222 mm × 88 mm × 280 mm
Weight approx.: 3.25 kg (7.16 lb)
Warm-up time:   60 min

 
 

Rekommenderas

Rohde & Schwarz HZC815 Nätadapter
Rohde & Schwarz HZC815
Rohde & Schwarz HZC815 Nätadapter
Med denna HZC815 nätadapter kan du ansluta ett mätobjekt med...